MUSIC

Filters

Showing all 116 results

View 20/40/All

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets

116 products

  • ACCBL01 - Synthtrotek Flying Bus Cable -5
    ACCBL01 - Synthtrotek Flying Bus Cable -7

    Deluxe Flying Bus Cable – Synthrotek

    The Deluxe 10 Connection Flying Bus Cable makes connecting power to your module a snap and a reality, especially if you have 10-pin powered module that has little room around the power pins.  There are 10 Male Shrouded and Keyed Eurorack connectors  for distributing power to your modules. There are also two keyed 16-pin female connectors for powering the cable and for daisy-chaining another flying bus cable (although you could connect this end directly to a module that takes 16-pin power (or 10 if there is room).

    Rp235.000,00
  • Glow Worm Cables Mix-4
    Glow Worm Cables Mix-1

    Glow Worm Cable 80 cm / 31″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 80 cm | 31.4 inch

    Rp50.000,00
  • Glow Worm Cables Blue with Blue tip-1
    Glow Worm Cables Mix-1

    Glow Worm Cable 60 cm / 23″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 60 cm | 23.6 inch

    Rp47.500,00
  • Glow Worm Cables Mix-10
    Glow Worm Cables Mix-1

    Glow Worm Cable 50 cm / 19″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 50 cm | 19.8 inch

    Rp45.000,00
  • Glow Worm Cables Mix-3
    Glow Worm Cables Mix-1

    Glow Worm Cable 40 cm / 15″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 40 cm | 15.7 inch

    Rp42.500,00
  • Countour-makenoisemusic-analogcouple-webstore
    Countour-makenoisemusic-analogcouple-webstore

    Contour – Make Noise

    ,

    Contour is a 4 Stage function generator, or ADSR, derived from our 0-COAST synthesizer. It is designed to create control voltages to drive the Dynamix, modDemix and other fast VCAs, VCFs, and more. The Contour takes inspiration from the original Loudness Contour circuit of the MiniMoog, which is perhaps the most well-known example of East Coast Synthesis. The simplified control set (where Decay adjust both the decay to Sustain and the Release) makes it quick and intuitive to set-up. The Contour module adds full voltage control, a mirrored output, End of Onset and End of Contour Gate outputs which allow it to be highly integrated into any modular synthesizer regardless of coastal allegiance.

    Rp1.850.000,00
  • Moddemix-makenoisemusic-analogcouple-webstore
    Moddemix-makenoisemusic-analogcouple-webstore

    ModDemix – Make Noise

    ,

    The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.

    Rp2.250.000,00
  • Pressure Points-makenoisemusic-analogcouple-webstore
    Pressure Points-makenoisemusic-analogcouple-webstore

    Pressure Points – Make Noise

    ,

    Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.

    Rp3.350.000,00
  • Brains-makenoisemusic-analogcouple-webstore
    Brains-makenoisemusic-analogcouple-webstore

    Brains – Make Noise

    , ,

    BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!

    Rp1.850.000,00
  • Skiff Case No Power – Make Noise

    ,

    In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our René and Pressure Points touch controllers.

    Today the Make Noise Skiff is updated to provide a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created.

    Rp1.500.000,00
  • Skiff With Power-makenoisemusic-analogcouple-webstore
    Skiff With Power-makenoisemusic-analogcouple-webstore

    Skiff Case With Power – Make Noise

    ,

    In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our René and Pressure Points touch controllers.

    Today the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.

    Rp3.950.000,00
  • 7u Steel CV Bus Case – Make Noise

    ,

    Our 208hp 7U Steel CV Bus Case ships ready to use. Just add modules, patch cables, and inspiration. The powder-coated steel construction is 2 lbs. lighter than our wood Shared System case without compromising mechanical durability. The sleek matte black finish was selected to match our line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth’s travels over the years.

    Rp10.850.000,00
  • Cartesian-makenoisemusic-analogcouple-webstore
    Cartesian-makenoisemusic-analogcouple-webstore

    Black & Gold System Cartesian – Make Noise

    ,

    A complete modular synth that travels to ALL COASTs and puts the René Cartesian Sequencer to fantastic use along the way. This system is capable of Subtractive Synthesis, Additive Synthesis, FM Synthesis, Phase Modulation Synthesis, Ring Modulation, Amplitude Modulation and more… often simultaneously.

    Rp33.500.000,00
  • bgss+-makenoisemusic-analogcouple-webstore
    bgss+-makenoisemusic-analogcouple-webstore

    Black & Gold Shared System Plus – Make Noise

    ,

    The Shared System re-made in Black & Gold w/ the Erbe-Verb, Morphagene, TEMPI, and CV Bus added in a steel case with the Make Noise logo. The personal favorite system of Make Noise founder Tony Rolando, this collection of modules is utilized by all artists for the Make Noise Records Shared System Series. It was also utilized by both Alessandro Cortini and Richard Devine for their performances at the 2012 Make Noise Opening party. The Shared System is the deepest and most complex of our systems bringing together all of our synthesis techniques into one system. From analog FM to voltage controlled granularization, the Shared System will go to more sound destinations than most folks have time to travel to in a single lifetime.

    The CV Bus was originally designed for Alessandro Cortini’s personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are color coded and distributed across the center of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The color coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

    (read more below…)

    Rp73.500.000,00
  • 0 Coast-makenoisemusic-analogcouple-webstore
    0 Coast-makenoisemusic-analogcouple-webstore

    O-Coast – Make Noise

    ,

    The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka “East Coast,” and “West Coast,” due to their locations), but is loyal to neither and thus implements “no coast synthesis.”

    While the 0-COAST utilizes classic modular synthesis techniques, we designed it to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

    Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you’ve ever known.

    Rp8.250.000,00
  • Mult-makenoisemusic-analogcouple-webstore
    Mult-makenoisemusic-analogcouple-webstore

    Mult – Make Noise

    ,

    The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit). It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple. The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.

    Rp550.000,00
  • Dynamix-makenoisemusic-analogcouple-webstore
    Dynamix-makenoisemusic-analogcouple-webstore

    DynaMix – Make Noise

    ,

    DynaMix is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter allows for using audio as a control voltage. It accepts audio signals and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for side-chaining and ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.

    Rp2.650.000,00
  • Tempi-makenoisemusic-analogcouple-webstore
    Tempi-makenoisemusic-analogcouple-webstore

    Tempi – Make Noise

    ,

    TEMPI is a 6 CHannel, polyphonic time-shifting clock module. It provides an intuitive method for creation and recall of complex clocking arrangements within a modular synthesizer system. Using HUMAN and/ or MACHINE programming you could re-create most classic Clock Divider and Multiplier arrangements and then continue on to create new ones. Store up to 64 for later recall and Select them using control signals from within your system or the Select Bus.

    Rp4.250.000,00
  • Erbe-Verb-makenoisemusic-analogcouple-webstore
    Erbe-Verb-makenoisemusic-analogcouple-webstore

    Erbe-Verb – Make Noise

    ,

    The Erbe-Verb is more than a collection of reverb algorithms or presets, it is a unique, modeless, continuously variable reverb algorithm with complete voltage control. Typical reverb types such as plate, room, hall, shimmer and others may be programmed by adjusting the knobs. The continuously variable algorithm allows for hybrid and unreal spaces to be found. Traveling between spaces is possible by modulating the algorithm or manually sweeping parameters. More than an end-of-chain effects unit, it’s a whole new building block for modular synthesis. Like the Echophon, it’s coded by Tom Erbe of soundhack.

    Rp7.700.000,00
  • LXD-makenoisemusic-analogcouple-webstore
    LXD-makenoisemusic-analogcouple-webstore

    LXD – Make Noise

    ,

    The LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an INput Signal. It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db/Octave response that is mildly-resonant, while CH. 2 offers a 6bd/Octave that is non-resonant. The OUTput of CH. 1 is normalled to the INput of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970s.

    Rp1.700.000,00
  • Telharmonic-makenoisemusic-analogcouple-webstore
    Telharmonic-makenoisemusic-analogcouple-webstore

    tELHARMONIC – Make Noise

    ,

    The tELHARMONIC is a Multi-Voice, Multi-Algorithm synthesizer module named for the music hall considered by some to be the location of the first electronic music concerts. It was coded by Tom Erbe with the goal of presenting three historically important pioneering electronic tone generation techniques less often implemented within the modular synthesizer.

    The tELHARMONIC’s roots go back further than the advent of electronic music, as it also takes a new approach to handling music theory in the modular context. TONIC, INTERVAL, DEGREE and D-GATE, allow for patch-programming of complex chord progressions, scales, melodies and playing styles. This Voltage Controlled Music Theory guides the Algorithms in a unified way, whereas CENTROID, FLUX and H-LOCK sculpt the timbre of each Algorithm uniquely, allowing for complex sounds to be created around a unified melodic structure and pattern.

    Rp5.500.000,00
  • Wogglebug-makenoisemusic-analogcouple-webstore
    Wogglebug-makenoisemusic-analogcouple-webstore

    Wogglebug – Make Noise

    ,

    The “WoggleBug” is a random voltage generator, originally designed by Grant Richter of Wiard Synthesizers. It is a continuation of the “smooth” and “stepped” fluctuating random voltage sources pioneered by Don Buchla within the Model 265 “Source of Uncertainty,” expanding it to include the other-worldly Woggle CVs (stepped voltages with decaying sinusoids edges). The Wogglebug is a very musical random voltage generator where it is possible to synchronize all random signal to a Master Clock. Guaranteed to unleash your synthesizer’s ID MONSTER!

    Rp3.850.000,00
  • Maths-makenoisemusic-analogcouple-webstore
    Maths-makenoisemusic-analogcouple-webstore

    Maths – Make Noise

    ,

    MATHS is an analog computer designed for musical purposes.

    Rp4.550.000,00
  • Morphagene-makenoisemusic-analogcouple-webstore
    Morphagene-makenoisemusic-analogcouple-webstore

    Morphagene – Make Noise

    ,

    The Morphagene is a next generation tape and microsound music module that uses Reels, Splices and Genes to create new sounds from those that already exist. Search between the notes to find the unfound sounds.

    A few of the Morphagene’s most basic uses: Splice recorded audio and jumble it using ORGANIZE. Manipulate playback speed and direction with Vari-Speed. Granularize with Gene-Size and Slide. Layer or Stagger Genes using MORPH. Undertake iterative music processes by recording manipulations and overdubs into new Splices, like having two machines (one for Playback and modulations, one for Record). Process sound in real time using Time Lag Accumulation. Utilize envelope following CV OUT and EOSG Trigger to engage Morphagene in conversation with the rest of your modular system. Stretch and squash sound with Clock input.

    Rp8.350.000,00
  • Mutant Hihats-hexinverter-analogcouple-webstore
    Mutant Hihats-hexinverter-analogcouple-webstore

    Mutant Hihats – Hexinverter Électronique

    ,

    dual analog hihats (open+closed)

    A classic electro percussion synthesis design reborn as something completely different.

    We wanted to recreate a classic hihat synthesis design as something new and exciting, so, we took the super electro 808 circuit and transformed it into a powerful creative tool for modular synthesis!

    Rp3.550.000,00
  • Mutant Clap Front-hexinverter-analogcouple-webstore
    Mutant Clap Back-hexinverter-analogcouple-webstore

    Mutant Clap – Hexinverter Électronique

    ,

    analog hand-clap percussion generator

    The TR-909’s clap featured one control the user could adjust: volume. That was not okay with us.

    I’m a huge fan of house music. I love the 909 clap. So this is a module I agonised over features I wanted it to have for a long time. And here it is. I hope you find it as useful as I do!

    Rp3.850.000,00
  • Mutant Snare-hexinverter-analogcouple-webstore
    Mutant Snare-hexinverter-analogcouple-webstore

    Mutant Snare – Hexinverter Électronique

    ,

    analog snare drum synthesis with external input

    From classic electro snares to warping, alien percussion, the Mutant Snare is a radical departure from the static sounds of the 808!

    Rp3.850.000,00
  • Mutant Bassdrum-hexinverter-analogcouplewebstore
    Mutant Bassdrum-hexinverter-analogcouplewebstore

    Mutant Bassdrum – Hexinverter Électronique

    ,

    analog bassdrum & voltage-controlled distortion

     

    Rp3.550.000,00
  • BD9-hexinverter-analogcouple-webstore
    BD9-hexinverter-analogcouple-webstore

    Mutant BD9 – Hexinverter Électronique

    ,

    analog bassdrum synthesis with sub-oscillator

    Not just another clone or continuation of the 808-esque, acid-style kicks of the Mutant Bassdrum – the Mutant BD9 seeks to explore uncharted bassdrum territory by having an integrated sub-oscillator for maximal auditory obliteration.

     

    Rp3.850.000,00
  • Moffenzeef_Deviant_analogcouple
    Moffenzeef_Deviant_analogcouple

    Deviant – Moffenzeef Modular

    ,

    IF YØU ARE LØØKING FØR A CLEAN STEPPED RANDØM STØP READING NØW. THIS MØDULE WAS DESIGNED WITH THE INTENTIØN ØF FØRCING ØTHER MØDULES TØ SØUND LIKE GARBAGE.

    *THIS MØDULE PAIRS NICELY WITH DRUM MØDULES WHERE THE USER WANTS TØ DIAL IN SUBTLE VARIATIØNS IN TIMBRE UPØN EACH TRIGGERING ØF THE DRUM.

    Rp2.350.000,00
  • Moffenzeef_The Count_analogcouple
    Moffenzeef_Count_analogcouple

    Count – Moffenzeef Modular

    ,

    ØNE MØDULE! FIVE CLØCKS! AH AH AH AH AHH!

    The CØUNT (BLEH!) is a master cløck transpørt with a rich feature set suitable før a small drum system. User has cøntrøl øver master tempø with cøarse and fine adjustments as well as bipølar CV mødulatiøn capabilities. There is a range switch which alløws the master tempø tø tøggle frøm sløw tø fast speeds. The master cløck can be initiliazed with a start/støp switch. Pulse width før all øutputs can be cøntrølled with a single knøb ør bipølar CV.

     

    Rp2.750.000,00
  • Moffenzeef_Mito_analogcouple
    Moffenzeef_Mito_analogcouple

    Mito – Moffenzeef Modular

    ,

    DIVIDE AND CØNQUER

    MITØ (derived frøm “mitøsis”) is a 6 channel trigger sequencer that specializes in swingin’, divide’n, n’ pølyrhythm’n. With the turn øf a knøb, the user can select which divisiøn øf the incøming cløck (BANG!) is øutput frøm the cørrespønding jack (all the way left: divide by 16, all the way right: divide by 1). Each channel is equipped with it’s øwn mute switch, alløwing the user tø turn each individual sequence øn and øff while øther channels keep chuggin’ and cløckin’ aløng. Gløbal swing can be cøntrølled with the amøeba knøb in the tøp right hand cørner øf the mødule. Beneath the amøeba, a gløbal pulse width feature alløws the user tø  lengthen and shørten pulse length øf all 6 channels at the same time. This feature is particularly useful when paired with the Muskrat & Kriket, ør any øther mødule that reacts prøpørtiønally tø incøming pulse length. Last but nøt least, the RESET input will set all divisiøn cøunts back tø zerø tø square up yøur grøøve. Each channel will be held HIGH as løng as the incøming vøltage is HIGH. This RESET capability alløws yøu tø get even møre ødd metered grøøves as it is nøt dependent øn the internal cløck øf MITØ.

    Rp4.150.000,00
  • Moffenzeef_Dial Up_analogcouple
    Moffenzeef_Dial Up_analogcouple

    Dial Up – Moffenzeef Modular

    ,

    NØ, IT ISN’T BRØKEN. IT’S ANØTHER MØFFENZEEF DRUM

    Bask in the gløry øf the days øf yøre…when mødems and dial-up tønes reigned supreme. That gød awful søund emitted as yøu tried with all øf yøur might tø ping a cømmunicatiøn acrøss the gløbe…that søund…is precisely what we have harnessed and packaged intø a percussiøn vøice før the mødern day cyber junkie.

    Rp2.000.000,00
  • Moffenzeef_Muskrat_analogcouple
    Moffenzeef_Muskrat_analogcouple

    Muskrat – Moffenzeef Modular

    ,

    A VILE LITTLE WAVETABLE DRUM

    MUSKRAT is a flexible, 8-bit wavetable drum synth. There are 23 øn-bøard wavetables tø chøøse frøm, either manually ør via bipølar CV input. Pitch and phase distørtiøn include bipølar CV inputs and accept -5v to +5v. The “Trigger” input is designed withøut input cønditioning and picks up signals øf all varieties (In øther wørds it is an enveløpe følløwer circuit). Yøu can plug an external CV ør øffset intø this input and it will øperate like a regular VCA. Før even møre extreme søund mangling, engage the MUSKRAT møde via the switch tø feed a randøm number intø the phase accumulatør at the internal cløck rate. This møde alsø includes a gate input that acts as an “accent”.

    Basically, pick a kraptastique wave, change the pitch, mangle the hell øut øf it, feed the rødent, BANG! it; yøu’ve caught yourself a Muskrat. WARNING: if yøu feed the rødent (“my…gød…what…have…we…døne?”) it’s brain gøes intø a fiery frenzy and spits øut glitch after glitch øf høly bleepbløøpness. If yøu yank øn it’s tail it’ll shriek a lil’ lønger, especially if yøu’re pulling it at løng range.  Beware, ønce yøu let this critter øut øf the cage it will want tø nest sø BANG! it øn the head!

    Rp2.000.000,00
  • Malekko_Heavy_Industry_Noise_Analog_Couple
    Malekko_Heavy_Industry_Noise_Analog_Couple

    Noise – Malekko Heavy Industry

    ,

    3HP NOISE MODULE

    3hp noise module including timbre control (manual or CV input) for digital, white, pink and vlf (very low frequency) outputs.

    Rp1.650.000,00
  • Malekko_Heavy_Industry_borg_analog_couple_webstore
    Malekko_Heavy_Industry_borg_analog_couple_webstore

    Richter Dual Borg Filter – Malekko Heavy Industry

    ,

    DUAL ANALOG FILTER MODULE

    The Dual Borg contains one Borg I (left side) and one Borg II (right side). These are two different filters, each with their own character. They do not sound the same nor react the same way to your inputs. The Dual Borg is a versatile audio processor and the concept comes from a marriage of two divergent influences: the Buchla 292 Low Pass Gate and the Korg MS20 filter.

    Rp5.000.000,00
  • Malekko_Heavy_Industry_Oscilator_analog_couple_webstore
    Malekko_Heavy_Industry_Oscilator_analog_couple_webstore

    Richter Oscillator II – Malekko Heavy Industry

    ,

    ANALOG OSCILLATOR/LFO MODULE

    The Malekko/Richter Oscillator II is a great-sounding, solid analog Oscillator/LFO with some serious tricks up its sleeve. Fine and Coarse frequency controls are provided. Volt per octave and exponential (with attenuator) CV frequency inputs are provided. An output for each waveform is provided (Sine/Triangle/Square/Saw). A second series of outputs are provided for phase-modulated versions of the Triangle, Square, and Saw waveforms.

    Rp3.850.000,00
  • Malekko_Heavy_Industry_anti oscilator_analog_couple_webstore
    Malekko_Heavy_Industry_anti oscilator_analog_couple_webstore

    Richter Anti Oscillator – Malekko Heavy Industry

    ,

    ANALOG WAVESHAPING OSCILLATOR MODULE

    The Richter Anti-Oscillator is an analog triangle-core oscillator with unique voltage-controllable waveshaping capabilities.

     

     

    Rp3.850.000,00
  • Malekko_Heavy_Industry_8nu8r_analog_couple_webstore
    Malekko_Heavy_Industry_8nu8r_analog_couple_webstore

    8NU8R – Malekko Heavy Industry

    ,

    DUAL ANALOG ATTENUATOR MODULE

    The Malekko 8NU8R is a clever utility. A dual 4hp attenuator, the 8NU8R also sports the ability to switch on diode rectification waveshaping. Regular attenuation, as well as full and half wave rectification with adjustable attenuation, are possible. When no input is present, each half of the 8NU8R produces a steady DC voltage (offset) adjustable by the level control. DC offsets have many uses in a modular system.

    Rp1.250.000,00
  • Malekko_Heavy_Industry_invert mix_analog_couple_webstore
    Malekko_Heavy_Industry_invert mix_analog_couple_webstore

    Invert Mix – Malekko Heavy Industry

    , ,

    Includes 3 audio or DC inputs, 3 inverted outputs as well as an inverted sum and non-inverted sum outs. Invert waveforms, envelopes etc.

    Rp1.075.000,00
  • Malekko_Heavy_Industry_Mult Front_analog_couple_webstore
    Malekko_Heavy_Industry_Mult Front_analog_couple_webstore

    Performance Buffered Mult – Malekko Heavy Industry

    ,

    The 2hp Performance Buffered Mult features 2 sets of 3 outputs as well as a SWITCH for disconnecting the 2nd input to make a total of 6 outputs. It’s the perfect mult solution for live performance!

    Rp1.200.000,00
  • Malekko_Heavy_Industry_Mute4_analog_couple_webstore
    Malekko_Heavy_Industry_Mute4_analog_couple_webstore

    Mute 4 – Malekko Heavy Industry

    ,

    3HP 4-CHANNEL MUTE MODULE

    Four channels of audio or cv inputs + summed output for muting on the fly!

    Rp1.650.000,00
  • Malekko_Heavy_Industry_Varigate 4 side_analog_couple_webstore
    Malekko_Heavy_Industry_Varigate

    Varigate 4+ – Malekko Heavy Industry

    ,

    4-CHANNEL 8-STEP GATE PLUS CV SEQUENCER

    The Varigate 4+ is a 4-channel, 8-step sequencer that includes the features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you’re looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).

    Rp4.350.000,00
  • Malekko_Heavy_Industry_Varigate 8_analog_couple_webstore
    Malekko_Heavy_Industry_Varigate 8_analog_couple_webstore

    Varigate 8+ – Malekko Heavy Industry

    ,

    8-CHANNEL 16-STEP GATE SEQUENCER + 2 CV OUTS

    VARIGATE 8+ is designed to be the ultimate compact sequencer and control station over an entire Eurorack modular system. Create songs and live performance material with 8 channels of gate outputs with up to 16 steps per channel, 2 independent CV outputs for custom scale quantization, easy recall of 10 storage banks and 100 channel presets, random functions, mute functions and so much more!

    Rp8.500.000,00
  • Malekko_Heavy_Industry_Voltage Block_analog_couple_webstore
    Malekko_Heavy_Industry_Voltage Block_analog_couple_webstore

    Voltage Block – Malekko Heavy Industry

    ,

    8-CHANNEL 16-STAGE CV SEQUENCER

    Voltage Block is an 8 independent 16-stage CV sequencer packed with performance features and presets making the Voltage Block the ultimate CV tool. Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more.

    Rp5.350.000,00
  • Accutronic Tanks - Intellijel_analogcouple
    Accutronic Tanks - Intellijel_analogcouple

    Accutronic Spring Tank – Intellijel

    ,

    Spring. Sprang. Sprung.

    Three spring reverb tanks. Three distinct tonalities. Go ahead and collect them all — you know you want to. And you have enough gozintas and gozoutas on your Springray2 to attach all three tanks… simultaneously.

    Spring reverb tanks. Three sizes with three different sonic characteristics. If you have a Springray2, you’ll need at least one of these tanks, but know that you have enough connections on a single module for all three tanks!

    Rp250.000,00Rp450.000,00
  • Springray II - Intellijel_analogcouple
    Springray II - Intellijel_analogcouple

    Springray II – Intellijel

    ,

    Versatile Real Spring Tank Reverb Module

    Physical Analog

    A true spring reverb is an almost magical device. Deceptiviely simple in concept but capable of producing extremely rich and hauntingly beautiful sounds. Not just a retro novelty; spring reverbs are still used extensively whether it is nailing a classic dub reggae sound, adding some shimmer to a synth riff or creating some space on a vocal track in a big studio. This is a reverb that rewards real-time tweaking: crank the feedback, sweep the filter and play with the ghostly feedback drones that ensue. Better yet, try animating them with CV and inserting other modules into the feedback path.

    Rp3.750.000,00
  • Planar II - Intellijel_analogcouple
    Planar II - Intellijel_analogcouple

    Planar II – Intellijel

    ,

    Recordable Vector Joystick

    Modulator Joy

    The most complex modulator is you. The Planar 2 puts macro control over six outputs—including a quad panning mixer—into your hands with a buttery smooth joystick. Record up to 30 seconds of your own movements, stretch it or mangle it with scan mode, use a trigger for playback, or just loop it—synced or not. Add yourself to your patch.

    Rp5.250.000,00
  • Buff Mult - Intellijel_analogcouple
    Buff Mult - Intellijel_analogcouple

    Buff Mult – Intellijel

    ,

    Buffered Multiple

    Mighty Multiplier

    Multiply one audio/CV signal into six perfect copies or two signals into two sets of three. Multiply your sequencer out to multiple oscillators and send a third copy to your favorite modulation input.

    Rp1.200.000,00
  • uVCA_intellijel_analogcouple
    uVCA_intellijel_analogcouple

    µVCA – Intellijel

    ,

    Dual VCA

    Tight, But Perfect Fit

    A great fit for a small system or to fill in that last bit of space in your performance rack. Dial in the exact sweet spot with the variable control response. It can also act as a 2 channel mixer in a pinch. There’s always room for a couple more VCAs in your patch.

    Rp2.375.000,00
  • uFold - Intellijel_analogcouple
    uFold - Intellijel_analogcouple

    µFold II – Intellijel

    ,

    Wavefolder / Wave Shaper for CV and Audio

    Into the Fold

    Traditional subtractive synthesis starts with a complex waveform and then filters it down. A wavefolder allows for the opposite: start with simple waveforms and then fold it over itself to create extremely rich and complex timbres. Animate the fold and symmetry controls with CV to add even more life and movement to the sounds.

    Rp2.475.000,00
  • uScale II - Intellijel - analogcouple
    uScale II - Intellijel - analogcouple

    µScale II – Intellijel

    ,

    Intelligent Quantizer and Interval Generator

    Make Anything Musical

    Your modular system is capable of generating complex, fluid and interesting voltages. Use the µScale to transform these voltages into musical pitches to control your oscillators and other sound sources. Modulate the results to introduce musical changes and patterns. Experience the magic of turning chaos into harmonious tones.

    Rp3.500.000,00
  • uMIDI - Intellijel_analogcouple
    uMIDI - Intellijel_analogcouple

    µMIDI – Intellijel

    ,

    USB/DIN MIDI Voice and Clock Interface

    Mission Control

    All the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack’s clock from the rest of your MIDI bus.

    Rp3.500.000,00
  • Plog - Intellijel_analogcouple
    Plog - Intellijel_analogcouple

    Plog – Intellijel

    ,

    Voltage Controlled Logic and Tap Clock

    Make/Break the Rules of Logic

    Derive complex rhythmic sequences from basic sparse sources like a gate sequence or random source. Add CV from an envelope, LFO, or controller to modulate the logic types for even more complex results. Possibly enough logical fun to make Spock smile.

    Rp3.450.000,00
  • Tetrapad - Intellijel_analogcouple
    Tetrapad - Intellijel_analogcouple

    Tetrapad – Intellijel

    ,

    Multi-Dimensional Performance Touch Controller

    Touch Your Music

    Nothing is more unique to your music than you. Press and slide your fingers along the four pads to turn your movements into CV and smooth out the rough edges with built-in slew. Use it as a keyboard, drum pads, faders, LFOs, voltage memory or more. Add yourself to your music.

    Rp4.650.000,00
  • Mutamix_intellijel_analogcouple
    Mutamix_intellijel_analogcouple

    Mutamix – Intellijel

    ,

    6 Channel, 3 Bus CV/Audio Mixer w/Digitally-Controlled Muting

    Beyond Mixing

    Blending signals and mixing audio is what patching is all about. Consider mixing up to six audio or CV signals down to three separate busses. Now take it a step beyond by sequencing or toggling mute states on the incoming signals with CV from a clock source, sequencer or even a random source.

    Rp4.250.000,00
  • Rainmaker_intellijel_analogcouple
    Rainmaker_intellijel_analogcouple

    Rainmaker (Cylonix) – Intellijel

    ,

    16-Tap Stereo Spectral Rhythm Delay And Comb Resonator

    Make It Rain… Or Shine

    Cylonix and Intellijel are at it again with a combination rhythm and comb delay module. The Rhythm Delay allows individual control of any or all 16 taps—set timing, level, pan, filter type, cutoff and Q on each tap. The Comb Delay opens up further possibilities for complex comb filtering, along with resonator or reverb effects. Bring some light showers or something more torrential to your rack.

    Rp9.850.000,00
  • Shapeshifter_intellijel_analogcouple
    Shapeshifter_intellijel_analogcouple

    Shapeshifter (Cylonix) – Intellijel

    ,

    Dual Complex Morphable Wavetable Digital VCO

    The Deep End

    Cylonix and Intellijel have collaborated to bring you a complex digital wavetable oscillator with an extensive FM synthesis engine. 1024 Waveforms, LFO Toggles for both oscillators, deep internal FM, preset sequencing and morphing, built-in delay, 64 band vocoder, analog wavefolder, chord mode, eight sync types, percussion mode, TZFM and so much more. You’re in for years of exploration.

     

    Rp8.150.000,00
  • Rubicon_II_Intellijel_analogcouple
    Rubicon_II_Intellijel_analogcouple

    Rubicon II – Intellijel

    ,

    Analog Triangle Core Thru-Zero FM VCO

    Proudly Analog

    This is not a set it and forget it oscillator. It’s an oscillator that demands to be tweaked, modulated and explored. It’s an oscillator that’s proudly analog and eschews all shortcuts. As such, it’s an oscillator that rewards you with sounds as boundless as your creativity.

    Rp6.175.000,00
  • Dixie II+_intellijel_analogcouple
    Dixie II+_intellijel_analogcouple

    Dixie II+ – Intellijel

    ,

    Full-Featured Triangle Core VCO/LFO

    The Heart+

    The beating heart(s) of your rack, the analog oscillator. If the Dixie2‘s six waveform outputs don’t offer enough shapes for you, the PWM, sync, and FM inputs have you covered. Unique to the Dixie2+ is PWM control, exponential FM, and an Octave switch for quick asnd precise musical tuning. Great in pairs, two hearts are better than one.

    Rp3.550.000,00
  • Shifty_intellijel_analogcouple
    Shifty_intellijel_analogcouple

    Shifty – Intellijel

    ,

    Voice Allocator / Note Hocketing / Analog Shift Register

    Creativity Router

    Patching is all about creativity. You could simply mult your sequence across your rack or let Shifty spread the notes across time, holding, swapping and routing them. Queue up notes or CV for distribution to up to four modules and dive into the world of hocketing, shift registers and pseudo polyphony.

    Rp2.950.000,00
  • USB ISP - Intellijel_analogcouple
    USB ISP - Intellijel_analogcouple

    USB ISP – Intellijel

    ,

    For use with the official Intellijel Firmware Updater app. It’s required to update firmware on Plog, Metropolis, Mutamix, µScale, and µStep.

    Rp350.000,00
  • USB-POWER_1U-intellijel_analogcouple
    USB-POWER_1U-intellijel_analogcouple

    USB Power 1U – Intellijel

    ,

    USB Socket for Charging/Powering Peripheral Devices

    More Power To You

    Convenient USB power source for your handy peripherals. Whether it’s an LED Light or a small desktop synth, this jack provides 1A of power from an Intellijel power supply to an attached USB device.

    Rp250.000,00
  • Mixup - Intellijel_analogcouple
    Mixup - Intellijel_analogcouple

    Mixup – Intellijel

    , ,

    Chainable Mono / Stereo Audio Utility Mixer

    Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel)  and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

    Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

    Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for ‘pops’ when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

    Rp1.550.000,00
  • uJack - Intellijel_analogcouple
    uJack_intellijel_analogcouple

    µJack – Intellijel

    ,

    Headphone amp and stereo 1/4″ outs

    Get it out of your Rack

    Record everything. You never know when you’re going to hit that groove and when you do you’ll be glad you captured it. Eurorack signals are really hot, tame them down to line level for your mixer, amp, or recorder. Monitor your patch thought the low noise headphone amp.

    Rp1.900.000,00
  • Polaris - Intellijel_analogcouple
    Polaris - Intellijel_analogcouple

    Polaris – Intellijel

    ,

    Versatile Multimode VCF + Phaser

    The Search

    Liquid, buttery filtering with refinement. The Polaris offers a massive 27 filter options over five categories. With a simple UI, three additional dedicated outs, overdrive and distortion circuits, you’ll find your sound.

    Features

    • Dedicated LP, BP and HP outputs.
    • MULTI output with 27 selectable filter types: 4 x LP, 5x BP, 4 x HP, 5 x Notch, 4x AP and 4 x Phaser (AP mode with inverted dry blend).
    • Input drive control with soft clipping distortion.
    • MULTI output asymmetric distortion.
    Rp3.600.000,00
  • Quad VCA - Intellijel_analogcouple
    Quad VCA - Intellijel_analogcouple

    Quad VCA – Intellijel

    ,

    Quad Voltage Controlled Amplifier and Cascaded Mixer

    Oh My Quad…

    When you get into eurorack, you’ll inevitably come across the old addage—you can never have enough VCAs. It’s true, but it’s a bit over simplified, the Quad VCA is not. Each of the four VCAs has independant level control, bipolar CV inputs with attenuators and led indicators, adjustable linear/exponential response and and a +6dB boost switch to double the channels output. Each channel’s CV inputs are cascaded to the next, as are its outputs so that you can create submixes.

    Rp2.950.000,00
  • Dual ADSR - Intellijel_analogcouple
    Dual ADSR - Intellijel_analogcouple

    Dual ADSR – Intellijel

    ,

    Dual slider based ADSR envelope

    The circuit is based in part on the Roland SH-101 / System100m design with several enhancements.

    • Manual GATE buttons
    • Three timing ranges: (1 second, 10second, 1minute A/D times)
    • Normal and inverted outputs
    • End of Decay (EOD) logic output
    • Cycle mode (which GATE logic control)
    • Retrig input (allows re-triggering of the envelope if source gate held high)
    • Dynamic control of the envelope output level (each ADSR is routed through a linear VCA and the control is normalled to +5V via the LEVEL jack. You can patch another control source like an LFO or VELOCITY level from a keyboard to this jack.
    Rp3.500.000,00
  • Intellijel Patch Cables - Intellijel_analogcouple
    Intellijel Patch Cables - Intellijel_analogcouple

    5 pak assorted colors 12″ 3.5mm cable – Intellijel

    ,

    Never run out of cables

    Quality patch cables for use with eurorack modules by the excellent Ad Infinitum. Trust us, you’ll need a lot of these.

    Follow the Rainbow

    Legend has it there’s a pot of gold at the end of every rainbow. We don’t know if every patch you create will be gold, but we’re happy to provide you with the rainbow. Included colours may vary, but usually include:

    • Red
    • Green
    • Yellow
    • Blue
    • Grey
    Rp185.000,00
  • Hub Mult (single) - Intellijel_analogcouple
    Hub Mult (Pile) - Intellijel_analogcouple

    Hub Mult – Intellijel

    ,

    Zero HP Passive Mult

    How about a few of these little robot buddies sitting on top of your rack, instead of in it?  1×3 passive mults with mandatory robots, and optional magnets for easy stacking/attaching.

    Features

    • 4 channel passive multiple.
    • Durable plastic enclosure.
    • High quality gold-plated PCB-mounted jacks.
    • Fully serviceable (just undo two screws to access the jacks).
    • Optional Super strong rare-earth neodymium magnets on both sides of the enclosure. The magnets allow the hubs to be stacked or attached to metal or magnetic strips on your case. They can even attach to screws.

    Manual is available here.

    Rp150.000,00Rp165.000,00
  • Power Entry 01 - Intellijel_analogcouple
    Power Entry 01 - Intellijel_analogcouple

    Power Entry 2.5 mm – Intellijel

    ,

    Jack + Switch for Meanwell Power Bricks

    A DC barrel jack and power switch for connecting power to the TPS30 or TPS80 powered busboards.

     

    Rp475.000,00
  • PE-1-Power-Entry_1U-intellijel_analogcouple
    PE-1-Power-Entry_1U-intellijel_analogcouple

    PE-1 1U 2.5 mm – Intellijel

    ,

    Jack + Switch for Meanwell Power Bricks

    A DC barrel jack and power switch for connecting power to the TPS30 or TPS80 powered busboards.

    A panel with DC barrel jack and power switch for conveniently connecting power to the TPS30 or TPS80 powered busboards.

    Rp500.000,00
  • TPS30W-MAX-Intellijel_analogcouple
    TPS30W-MAX-Intellijel_analogcouple

    TPS30W MAX Eurorack Power Supply – Intellijel

    ,

    No more paperwork

    You’ve finally quit that stuffy office job to follow your dreams, it’s time to convert that briefcase. No better place to start than with a low noise TPS30 Max 30W power supply.

    The TPS30W MAX  is a high power, super efficient and low noise studio grade power system for your Eurorack Modular. We carefully designed this power supply to perform optimally with even the most demanding, noisy and power hungry modules in your rig. The TPS30W MAX is recommended for cases up to 6U x 84hp in size.

    Rp2.150.000,00
  • Midi-JACKS_1U-intellijel_analogcouple
    Midi-JACKS_1U-intellijel_analogcouple

    µMidi JACKS 1U – Intellijel

    ,

    DIN/USB Input Jacks

    USB and DIN jacks for interfacing MIDI equipment with the µMIDI 1U module. Our 7U cases have the jacks built-in, this 1U Jacks module is for the rest of you.

    Rp2.150.000,00
  • MIDI_1U-WEB-intellijel_analogcouple
    MIDI_1U-WEB-intellijel_analogcouple

    µMidi 1U – Intellijel

    ,

    USB/DIN MIDI Voice and Clock Interface

    Mission Control

    All the essentials to control and sync your rack to your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack’s clock from your MIDI bus.

    Width 22HP
    Depth 25mm
    Power 47mA @ 12V
    3mA @ -12V
    Rp350.000,00
  • Quadratt_1U-Intellijel_analogcouple
    Quadratt_1U-Intellijel_analogcouple

    Quadratt 1U – Intellijel

    ,

    “Quad attenuator, Attenuverter, Mixer and DC voltage source”

    Voltage Control

    Sometimes you just need a quick audio mixer; a voltage offset; a CV mixer; an attenuator; an attenuverter; or just a voltage. Mix and match the four controls to your needs.

    Features

    • Active/Buffered Attenuator/Attenuverter/Mixer with external signals.
    • Each output normalled to mix into the adjacent channel on the right making it possible to do sub mixes in groups of 2, 3 or all four channels.
    • 2 Modes for each channel (Unipolar and Bipolar).
    • 5v Normalled to each input.
    Rp1.050.000,00
  • Plonk - Intellijel_analogcouple
    Plonk - Intellijel_analogcouple

    Plonk – Intellijel

    ,

    “Definitely one of the best drum synthesizers that you can find!”

    Physical Modelling Percussion Synthesizer

    Features

    • Resonator section models strings, beams, marimbas, drumheads, membranes, and plates.
    • Exciter section comprises a realistic mallet model and flexible noise source.
    • Two Voice Polyphonic at full resolution (16-bit 44.1Khz).
    • Pseudo multi-timbrality possible via CV selectable presets recalled on each new trigger/gate.
    • Full parameter randomization and morphing via CV/trigger.
    • All synthesis parameters can be assigned to the X, Y and MOD controls.
    • 128 user preset slots with import/export via USB and come filled with factory presets designed Richard Devine and AAS.
    • Laser Mammoth compatible preset management

     

    Rp5.350.000,00
  • atlantis - intellijel_analogcouple
    atlantis - intellijel_analogcouple

    Atlantis – Intellijel

    ,

    Analog Dual Oscillator Subtractive Synth Voice

    Modern Day Classic

    The Atlantis is heavily inspired by the architecture and sound of the classic Roland SH-101. It has always been one of our favorite synths and we really liked how the seemingly limited architecture allowed for all sorts of creative and musically useful sounds to be easily generated. Just like the 101, it is quick to dial in a beautifully rich bass and lead sounds but there is much more sonic territory to explore as well.

    Main features:

    • Modulation VCO: triangle core with Hard Sync and Link switch to connect pitch to primary
    • Primary VCO: triangle core with Hard Sync, Octave switches, Linear/Exp FM and PWM
    • Global modulation bus with four VCO waveforms, noise and S&H options
    • Cascaded 4-Pole multimode filter
    • Looping ADSR with range switch, manual gate, and external level (velocity) control.
    • Three position output clipping circuit
    • 27 jacks for creative and complex patching options
    • Skiff Friendly
    Rp10.650.000,00
  • Metropolis - intellijel_analogcouple
    Metropolis (back) - Intellijel_analogcouple

    Metropolis – Intellijel

    ,

    ‘Complex multi-stage pitch and gate sequencer’

    Instant Melodies

    When you’re crafting melodies and patterns, nothing beats the immediacy of dedicated controls. Metropolis patterns are built in stages not just steps. Each stage has four dedicated controls to dial in instant melodies, repeats, skips, and slides. Dive in deeper to adjust direction, quantization scales, clock dividers, shuffle, and more. Inspired by the Ryk M-185 System 100m, the Metropolis has built its own reputation.

    Rp9.000.000,00
  • Delay-2hp-analogcouple-webstore
    Delay-2hp-analogcouple-webstore

    Delay – 2HP

    ,

    Delay is a flexible, full-featured delay audio processor. CV over all parameters provides dynamic access to its nuanced controls. The feedback path ranges from slapback to infinity, allowing for wild permutations of the original signal.

    With delay times from milliseconds to nearly two seconds, Delay is sure to find a use in every patching situation. Add subtle echo to a melodic line, or crank up the feedback and hear a bed of layered sounds to bury your listeners in.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.750.000,00
  • Arp-2hp-analogcouple-webstore
    Arp-2hp-analogcouple-webstore

    Arp – 2HP

    ,

    Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.

    With the rate of the arpeggio and reset capability in your own hands, you’re free to create dynamic rhythmic melodies from your favorite chords. Take your tonality for a ride with Arp.

    Only available in silver. Please send us a message if you’d like to have the module with black faceplate.

    Rp1.750.000,00
  • Comb-2hp-analogcouple-webstore
    Comb-2hp-analogcouple-webstore

    Comb – 2HP

    ,

    Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path.

    An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.750.000,00
  • TM front-2hp-analogcouple-webstore
    TM Side-2hp-analogcouple-webstore

    TM – 2HP

    ,

    TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user’s probability settings.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.550.000,00
  • VCA front-2hp-analogcouple-webstore
    VCA side-2hp-analogcouple-webstore

    VCA – 2HP

    ,

    The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.

    Currently out of stock. Please contact us for pre-order.

    Rp1.450.000,00
  • Tune-2hp-analogcouple-webstore
    Tune-2hp-analogcouple-webstore

    Tune – 2HP

    ,

    Tune is a multi-scale pitch quantizer. It features 11 scales ranging from chromatic to octatonic with everything in between. In addition, the bias control allows the user to transpose the melody to a different octave or starting note.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.550.000,00
  • Trim-2hp-analogcouple-webstore
    Trim-2hp-analogcouple-webstore

    Trim – 2HP

    ,

    Trim is a 2 channel passive attenuator. It features two individual channels of attenuation.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp550.000,00
  • Mix-2hp-analogcouple-webstore
    Mix-2hp-analogcouple-webstore

    Mix – 2HP

    ,

    Mix is a 4 channel mixer that is great for audio or control voltage signals. Up to four inputs can be combined to a single output each with its own level control.

    Rp1.550.000,00
  • Freez-2hp-analogcouple-webstore
    Freez-2hp-analogcouple-webstore

    Freez – 2HP

    ,

    Freez is a voltage controlled locked looper. It captures moments of audio in buffers, where they can be minced and mangled beyond recognition. Once frozen, adjusting size will cause pitch and timbre changes to the locked audio.

    Rp2.000.000,00
  • Switch-2hp-analogcouple-webstore
    Switch-2hp-analogcouple-webstore

    Switch – 2HP

    ,

    Switch is a voltage controlled signal router that is great for audio and CV signals. With four inputs and one output, it is ideal for dynamically moving between four disparate elements.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.750.000,00
  • Brst-2hp-analogcouple-webstore
    Brst Side-2hp-analogcouple-webstore

    Brst – 2HP

    ,

    Brst is a voltage controlled burst generator and trigger delay. Upon receipt of a gate signal, Brst will output a stream of triggers. Knobs and CV inputs give the user control over speed and the number of repetitions. Whether you’re generating bouncing balls, crafting IDM drum beats, or humanizing a clock signal, Brst will prove an indispensable addition to your rack.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.250.000,00
  • ADSR front-2hp-analogcouple-webstore
    ADSR Side-2hp-analogcouple-webstore

    ADSR – 2HP

    ,

    ADSR is a four-stage linear envelope with two expressive ranges. Each stage can be modified independently allowing for the creation of complex, multi-segment envelopes. Great for modulating filters, VCAs, and oscillators.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.405.000,00
  • Glow Worm Cables Mix-3
    Glow Worm Cables Mix-1

    Glow Worm Cable 25 cm / 9″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 25 cm | 9.8″

    Rp37.500,00
  • DIY Swamp (Full Kit) - Erica Synths
    DIY Swamp (Full Kit) - Erica Synths

    DIY Swamp (Full Kit) – Erica Synths

    , ,

    The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module; it’s often the heart of self-generating patches and brings controllable randomness to your modular system.

    In the SWAMP module we introduced numerous modifications and improvements to extend potentiometer range, added an audio input, which, when connected, replaces the internal Tone oscillator, replaced the expensive dual vactrol, built S&H circuit around the made in Riga S&H IC AS1100CK2, added audio waveform selection switches, CV output configuration jumpers and much more.

     Features:

    • Three random audio frequency outputs
    • External audio input routed to ring modulator
    • Three random CV outputs
    • Clock input and output to sync the module to your modular system
    • CV control over internal clock for even more extreme randomness
    • Skiff-friendly design
    Rp2.050.000,00
  • Sold out
    DIY Polivoks EG (Full Kit) - Erica Synths
    DIY Polivoks EG (Full Kit) - Erica Synths

    DIY Polivoks EG (Full Kit) – Erica Synths

    , ,

    The core of the Envelope Generator is borrowed from famous Russian synth Polivoks , but significantly updated schematics – eurorack standard positive gates, envelope amplitude, inverted envelope output, looping feature (looping on gate on). Bonus feature Gate Delay – the module outputs delayed gate signal after Attack stage. Chain up several (4-5) Envelope Generators, each with delayed gate to create evolving polyphonic synth-like pads!

      Features:

    • Full ADSR envelope
    • Direct and inverted envelope outputs
    • Gated and independent looping modes
    • Gate delay (after Attack stage) output
    • Skiff-friendly design
    Rp1.150.000,00
  • Sold out
    Fusion Mixer V3 - Erica Synths
    Fusion Mixer V3 - Erica Synths

    Fusion Mixer V3 – Erica Synths

    ,

    Use Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock and above. When used with drum machines, it even emulates side chain compressors. When used to mix signals from VCOs Fusion Mixer works as wave shaper, especially, if pulse width modulated pulse signals is used in one of inputs.

    All Fusion modules by default are configured to work with regular eurorack PSU.

          Features:

    • 6 audio inputs
    • Two independent 3-input mixer
    • Sum of all 6-inputs
    • Soft tube overdrive
    Configurable power supply – standard Eurorack +-12V connection OR Eurorack +-12V plus Erica Synths Tube heater PSU
    Rp4.350.000,00
  • DIY Modulator (Full Kit) - Erica Synths
    DIY Modulator (Full Kit) - Erica Synths

    DIY Modulator (Full Kit) – Erica Synths

    , ,

    Erica Synths DIY Modulator is 35mm deep, skiff friendly, has solid mechanical construction and doesn’t require wiring.

    The Modulator essentially is LFO with simultaneous triangle and square wave outputs, clockable S&H with external CV input and noise source. A kit comes with two versions of noise generator – simple, transistor-based and more complex Zener diode-based one. Latest provides perfect, full spectrum white noise.

     Features:

    • LFO with triangle and pulse wave outputs
    • Choice of transistor-based or Zener diode-based noise generator for massive, full spectrum white noise
    • S&H circuit based on rare, high quality S&H chip
    • S&H CV and clock inputs
    Rp1.350.000,00
  • Midi To Trigger - Erica Synths
    Midi To Trigger - Erica Synths

    Midi To Trigger – Erica Synths

    ,

    Control your drum modules and trigger events on your modular from any MIDI sequencer!

    If you want to use a MIDI sequencer to trigger events on your modular synthesizer (e.g. using the hexinverter.net Mutant drums range or Tiptop Audio classical drum modules or envelope generators to control VCAs), Erica Synths MIDI to trigger module is just what you need; it converts ANY MIDI notes to eight 10ms Trigger signals. When designing the module, we put usability as priority; it will take you seconds to program the module. It works with any MIDI sequencer & controller so there is no need to change MIDI controller settings, instead, you reprogram the module.

          Features:

    • Converts MIDI notes into Trigger signals
    • 8 Trigger outputs
    • LED indication of active Triggers
    • Easy assignment of MIDI notes to triggers
    • Configurable MIDI channel
    • Switchable MIDI clock output
    • Diode protection on reversed power supply
    Rp1.700.000,00
  • DIY Polivoks EG (PCB Only) - Erica Synths
    DIY Polivoks EG (PCB Only) - Erica Synths

    DIY Polivoks EG (PCB Only) – Erica Synths

    , ,

    The core of the Envelope Generator is borrowed from famous Russian synth Polivoks, but significantly updated schematics – eurorack standard positive gates, envelope amplitude, inverted envelope output, looping feature (looping on gate on). Bonus feature Gate Delay – the module outputs delayed gate signal after Attack stage. Chain up several (4-5) Envelope Generators, each with delayed gate to create evolving polyphonic synth-like pads!

     

      Features:

    • Full ADSR envelope
    • Direct and inverted envelope outputs
    • Gated and independent looping modes
    • Gate delay (after Attack stage) output
    • Skiff-friendly design
    Rp275.000,00
  • DIY Swamp (PCB + ICs) - Erica Synths
    DIY Swamp (PCB + ICs) - Erica Synths

    DIY Swamp (PCB + ICs) – Erica Synths

    , ,

    The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module; it’s often the heart of self-generating patches and brings controllable randomness to your modular system.

    In the SWAMP module we introduced numerous modifications and improvements to extend potentiometer range, added an audio input, which, when connected, replaces the internal Tone oscillator, replaced the expensive dual vactrol, built S&H circuit around the made in Riga S&H IC AS1100CK2, added audio waveform selection switches, CV output configuration jumpers and much more.

     Features:

    • Three random audio frequency outputs
    • External audio input routed to ring modulator
    • Three random CV outputs
    • Clock input and output to sync the module to your modular system
    • CV control over internal clock for even more extreme randomness
    • Skiff-friendly design
    Rp635.000,00
  • DIY Polivoks VCF II (Full Kit) - Erica Synths
    DIY Polivoks VCF II (Full Kit) - Erica Synths

    DIY Polivoks VCF II (Full Kit) – Erica Synths

    , ,

    Polivoks VCF is famous for its’ crazy resonance sweeps and deep, bassy sound which makes it ideal for acid basslines.

    We believe, this is one of most is one of most authentic sounding famous Russian synth Polivoks VCF emulations available. The original Russian ICs K140UD12 are used in the sound circuit. We did several updates to adapt the VCF for contemporary modular synth demands. Independently buffered inputs, extended Cutoff knob range, eliminated clicks, when switching filter modes, and output stage added to eliminate signal inversion.

        Features:

    • Switchable BP/LP modes
    • Inputs/outputs are protected against over-voltage
    • Protection on reversed power supply
    • Skiff friendly design

         

    The DIY Polivoks VCF II PCB only is also available.

    Rp1.350.000,00
  • DIY Polivoks VCF II (PCB Only) - Erica Synths
    DIY Polivoks VCF II (PCB Only) - Erica Synths

    DIY Polivoks VCF II (PCB Only) – Erica Synths

    , ,

    Polivoks VCF is famous for its’ crazy resonance sweeps and deep, bassy sound which makes it ideal for acid basslines.

    We believe, this is one of most is one of most authentic sounding famous Russian synth Polivoks VCF emulations available. The original Russian ICs K140UD12 are used in the sound circuit. We did several updates to adapt the VCF for contemporary modular synth demands. Independently buffered inputs, extended Cutoff knob range, eliminated clicks, when switching filter modes, and output stage added to eliminate signal inversion.

        Features:

    • Switchable BP/LP modes
    • Inputs/outputs are protected against over-voltage
    • Protection on reversed power supply
    • Skiff friendly design

    The DIY Polivoks VCF II Full Kit is also available.

    Rp475.000,00
  • DIY Polivoks VCO (Full Kit) - Erica Synths
    DIY Polivoks VCO (Full Kit) - Erica Synths

    DIY Polivoks VCO (Full Kit) – Erica Synths

    , ,

    The core of the VCO is borrowed from famous Russian synth Polivoks VCO and in exponential converter we use the original matched transistor IC that was used in Polivoks. But there are significant updated schematics to have the most out of your modular setup.

    Features:

    • Triangle, saw and pulse wave outputs
    • Manually adjustable and CV controlled pulse width
    • Great tracking across 8 octaves
    • Exponential FM input with attenuator
    • Synchronization input
    • Octave switch – 5 octaves
    • Skiff-friendly design
    Rp2.100.000,00
  • DIY Polivoks VCO (PCB + ICs) - Erica Synths
    DIY Polivoks VCO (PCB + ICs) - Erica Synths

    DIY Polivoks VCO (PCB + ICs) – Erica Synths

    , ,

    The core of the VCO is borrowed from famous Russian synth Polivoks VCO and in exponential converter we use the original matched transistor IC that was used in Polivoks. But there are significant updated schematics to have the most out of your modular setup.

    Features:

    • Triangle, saw and pulse wave outputs
    • Manually adjustable and CV controlled pulse width
    • Great tracking across 8 octaves
    • Exponential FM input with attenuator
    • Synchronization input
    • Octave switch – 5 octaves
    • Skiff-friendly design
    Rp635.000,00
  • Pico Drum Programmer - Erica Synths
    Pico Drum Programmer - Erica Synths

    Pico Drum Programmer – Erica Synths

    ,

    If you wish to upload your own drum samples to Pico DRUM module, you’ll need Pico DRUM programmer. Refer to Pico DRUM user manual for sample upload instructions!

    Rp350.000,00
  • Pico Drums - Erica Synths
    Pico Drums - Erica Synths

    Pico Drums – Erica Synths

    ,

    Erica Pico DRUM1 module gives you two independent great sounding drums with versatile control over several parameters and extensive collection of drum samples.

    Chain up several Pico Drums and get one of the smallest modular drum setup in the modular world!

          Features:

    • 2 independent drums
    • 64 samples for each drum
    • USB interface for user samples upload
    • Google app for sample upload
    • Independent controll over Pitch, Decay and Level for each drum
    • Independent controll over Pitch, Decay and Level for each drum
    • Seperate triggers for each drum
    • Audio output of mixed drum sounds
    • Exclusive switch to select how the two drums interact with
    • Each other when triggered at the same time
    • 12bit resolution, 44kHz sampling frequency
    Rp2.050.000,00
  • Sold out
    Pico A Mix - Erica Synths
    Pico A Mix - Erica Synths

    Pico A Mix – Erica Synths

    ,

    Erica Pico Audio Mixer is simple 3 channel AC coupled mixer intended to mix audio signals before feeding them in other modules.

    Features:

    • 3 inputs
    • Diode protection against overvoltage
    Rp875.000,00
  • Pico RND - Erica Synths
    Pico RND - Erica Synths

    Pico RND – Erica Synths

    ,

    Erica Pico RND is combined LFO/random source module.

    It generates sine LFO waves, white noise, S&H CV and some interesting stuff – random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.

    Features:

    • Sine and pulse LFO with manually controlled frequency
    • White noise generator
    • LFO rate synchronization to the external clock
    • Internally and externally clocked S&H CV output
    • Random trigger output
    Rp1.475.000,00
  • Pico VCO - Erica Synths
    Pico VCO - Erica Synths

    Pico VCO – Erica Synths

    ,

    Erica Pico VCO is great, deep sounding VCO with 32 selected waves – classical, fattened with sub-oscillator, FM synth and others.

    Typically you need several rather expensive modules to generate similar sounds. Extra feature – flip a switch, and you have a versatile LFO!     

          Features:

    • 2 banks, each contains 16 waves
    • VCO/LFO mode
    • Voltage controlled wavesurfing
    • Wave morphing in LFO setting
    Rp1.700.000,00
  • Sold out
    Pico Voice - Erica Synths
    Pico Voice - Erica Synths

    Pico Voice – Erica Synths

    ,

    Pico Voice from Erica Synths is amazingly versatile sound source just in 3HP. It features 8 sound generation algorithms: Karplus Strong, Chords, Wavetable, TB303 bass-line emulation, PWM, Supersaw, Wavefold and Harmonic saturation, with three adjustable parameters per algorithm and CV control over one user defined parameter. Despite the small size, Pico Voice sounds bigger than it is!

    Features:

    • 8 great sounding
    • Manual and 1V/oct Tuning
    • 2 adjustable parameters per algorithm
    • Assignable CV control over algorithms
    • User setting memory
    • Colour coded algorithms selection
    Rp2.050.000,00
  • Neumann - KH 80 DSP
    Neumann - KH 80 DSP

    Neumann – KH 80 DSP

    The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network control, a Mathematically Modeled Dispersion™ Waveguide (MMD™), an analogue input and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 80 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.

    The KH 80 DSP is designed for use as a near-field monitor, as a front loudspeaker in small multi-channel systems, or as a rear loudspeaker in a compact multi-channel systems. It can be used in project and music studios, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. It is also well suited for use in domestic environments.

    Rp16.821.000,00
  • Neumann - KH 120 A
    Neumann - KH 120 A

    Neumann – KH 120 A

    The Neumann KH 120-A Studio Monitor combines a 1″ titanium fabric dome tweeter powered by 50 W RMS (80 W peak) of analog amplification with a 5.25″ long throw composite sandwich cone bass driver powered by 50 W RMS 80 W peak) analog amplification with dual front panel bass ports. The two speaker drivers are mounted in an elliptical mathematically modeled dispersion waveguide for smoother off-axis response and a more forgiving sound signature in different acoustical environments.
    The front panel is made from one piece without discontinuities to reduce diffraction with protective metal grills and the cabinet is made of magnetically shielded aluminum to reduce resonances, improve heat dissipation, and extend the operating lifetime of the unit. The monitor is suitable for professional tracking, mixing, and mastering applications in broadcast, project, and post-production studios.
    The system delivers a free field frequency response of 52 to 21,000 Hz with 4-position bass, low-mid, and treble acoustical controls for tailoring the response to different rooms and an input gain control from 0 to -15 dB. The front panel Neumann logo functions as an LED indicator for power and clip/limiting but can also be dimmed for light applications and for use when placed behind screens. A variety of wall, ceiling, truss, subwoofer, stand, and surface mounting options are available through a range of accessories (sold separately).

    Rp25.311.600,00
  • Neumann - KH 310 A
    Neumann - KH 310 A

    Neumann – KH 310 A

    The KH 310 three-way active tri-amplified monitor features a Mathematically Modeled Dispersion™ Waveguide (MMD™), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.

    The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering.

    Rp75.881.400,00
  • Bespeco Cables
    Bespeco Cables
  • AC Custom - System 5
    AC Custom - System 5