Modular Synths

Filters

Showing 1–20 of 112 results

View 20/40/All

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets

1-20 of 112 products

  • ACCBL01 - Synthtrotek Flying Bus Cable -5
    ACCBL01 - Synthtrotek Flying Bus Cable -7

    Deluxe Flying Bus Cable – Synthrotek

    The Deluxe 10 Connection Flying Bus Cable makes connecting power to your module a snap and a reality, especially if you have 10-pin powered module that has little room around the power pins.  There are 10 Male Shrouded and Keyed Eurorack connectors  for distributing power to your modules. There are also two keyed 16-pin female connectors for powering the cable and for daisy-chaining another flying bus cable (although you could connect this end directly to a module that takes 16-pin power (or 10 if there is room).

    Rp235.000,00
  • Glow Worm Cables Mix-4
    Glow Worm Cables Mix-1

    Glow Worm Cable 80 cm / 31″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 80 cm | 31.4 inch

    Rp50.000,00
  • Glow Worm Cables Blue with Blue tip-1
    Glow Worm Cables Mix-1

    Glow Worm Cable 60 cm / 23″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 60 cm | 23.6 inch

    Rp47.500,00
  • Glow Worm Cables Mix-10
    Glow Worm Cables Mix-1

    Glow Worm Cable 50 cm / 19″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 50 cm | 19.8 inch

    Rp45.000,00
  • Glow Worm Cables Mix-3
    Glow Worm Cables Mix-1

    Glow Worm Cable 40 cm / 15″

    Glow in the dark Eurorack patch cable from Glow Worm Cable!

    Length: 40 cm | 15.7 inch

    Rp42.500,00
  • Countour-makenoisemusic-analogcouple-webstore
    Countour-makenoisemusic-analogcouple-webstore

    Contour – Make Noise

    ,

    Contour is a 4 Stage function generator, or ADSR, derived from our 0-COAST synthesizer. It is designed to create control voltages to drive the Dynamix, modDemix and other fast VCAs, VCFs, and more. The Contour takes inspiration from the original Loudness Contour circuit of the MiniMoog, which is perhaps the most well-known example of East Coast Synthesis. The simplified control set (where Decay adjust both the decay to Sustain and the Release) makes it quick and intuitive to set-up. The Contour module adds full voltage control, a mirrored output, End of Onset and End of Contour Gate outputs which allow it to be highly integrated into any modular synthesizer regardless of coastal allegiance.

    Rp1.850.000,00
  • Moddemix-makenoisemusic-analogcouple-webstore
    Moddemix-makenoisemusic-analogcouple-webstore

    ModDemix – Make Noise

    ,

    The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.

    Rp2.250.000,00
  • Pressure Points-makenoisemusic-analogcouple-webstore
    Pressure Points-makenoisemusic-analogcouple-webstore

    Pressure Points – Make Noise

    ,

    Pressure Points is a controller module, an analog sequencer that is played by hand. Touching the gold plated copper wires (aka Touch Plates), you become part of the circuit, generating a gate signal (Gate OUT), a control signal proportional to the amount of pressure applied (Press OUT) and the 3 Tuned Voltages for the activated Stage.

    Rp3.350.000,00
  • Brains-makenoisemusic-analogcouple-webstore
    Brains-makenoisemusic-analogcouple-webstore

    Brains – Make Noise

    , ,

    BRAINS is a clocked sequential binary event machine. It is designed to be connected to one or two Pressure Points to form a 4 or 8-Step 3-channel analog sequencer. Classic synthesis control!

    Rp1.850.000,00
  • Skiff Case No Power – Make Noise

    ,

    In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our René and Pressure Points touch controllers.

    Today the Make Noise Skiff is updated to provide a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created.

    Rp1.500.000,00
  • Skiff With Power-makenoisemusic-analogcouple-webstore
    Skiff With Power-makenoisemusic-analogcouple-webstore

    Skiff Case With Power – Make Noise

    ,

    In 2009 Tony designed the first Skiff to complement the vertically oriented cases available at the time by providing an ergonomic enclosure for our René and Pressure Points touch controllers.

    Today the Make Noise Skiff provides a smart way to build a small modular synthesizer. It is low cost, but extremely durable. The clean simple lines and matte black color place visual emphasis where the action is; the patch the artist has created. At one side there is a power button and the Make Noise logo is illuminated to show the power is ON.

    Rp3.950.000,00
  • 7u Steel CV Bus Case – Make Noise

    ,

    Our 208hp 7U Steel CV Bus Case ships ready to use. Just add modules, patch cables, and inspiration. The powder-coated steel construction is 2 lbs. lighter than our wood Shared System case without compromising mechanical durability. The sleek matte black finish was selected to match our line of Black & Gold modules, and it looks great with just about any module installed. This finish will show the story of your modular synth’s travels over the years.

    Rp10.850.000,00
  • Cartesian-makenoisemusic-analogcouple-webstore
    Cartesian-makenoisemusic-analogcouple-webstore

    Black & Gold System Cartesian – Make Noise

    ,

    A complete modular synth that travels to ALL COASTs and puts the René Cartesian Sequencer to fantastic use along the way. This system is capable of Subtractive Synthesis, Additive Synthesis, FM Synthesis, Phase Modulation Synthesis, Ring Modulation, Amplitude Modulation and more… often simultaneously.

    Rp33.500.000,00
  • bgss+-makenoisemusic-analogcouple-webstore
    bgss+-makenoisemusic-analogcouple-webstore

    Black & Gold Shared System Plus – Make Noise

    ,

    The Shared System re-made in Black & Gold w/ the Erbe-Verb, Morphagene, TEMPI, and CV Bus added in a steel case with the Make Noise logo. The personal favorite system of Make Noise founder Tony Rolando, this collection of modules is utilized by all artists for the Make Noise Records Shared System Series. It was also utilized by both Alessandro Cortini and Richard Devine for their performances at the 2012 Make Noise Opening party. The Shared System is the deepest and most complex of our systems bringing together all of our synthesis techniques into one system. From analog FM to voltage controlled granularization, the Shared System will go to more sound destinations than most folks have time to travel to in a single lifetime.

    The CV Bus was originally designed for Alessandro Cortini’s personal Make Noise system. It provides visual indication of level, rate and polarity for up to 4 control signals that will be shared throughout a patch. These 4 control signals are color coded and distributed across the center of the system allowing for quick, clean and intuitive patching. The distribution method is unlike the typical multiple since the control signals will appear beneath their possible destinations allowing for the use of shorter patch cables. The color coding and visual indication makes navigating complex patches easier and more intuitive. Typically, the CV Bus would be used to share the most important control signals in a patch such as your Master Clock.

    (read more below…)

    Rp73.500.000,00
  • 0 Coast-makenoisemusic-analogcouple-webstore
    0 Coast-makenoisemusic-analogcouple-webstore

    O-Coast – Make Noise

    ,

    The 0-COAST is a single voice patchable synthesizer. Its name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka “East Coast,” and “West Coast,” due to their locations), but is loyal to neither and thus implements “no coast synthesis.”

    While the 0-COAST utilizes classic modular synthesis techniques, we designed it to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!

    Using the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you’ve ever known.

    Rp8.250.000,00
  • Mult-makenoisemusic-analogcouple-webstore
    Mult-makenoisemusic-analogcouple-webstore

    Mult – Make Noise

    ,

    The Multiple is a simple but important module that allows for sending a signal to multiple destinations. Within the Make Noise system the Multiple may also be used for combining clock, gate and pulse signals together to create interesting timing sources (in other words, it acts as a Gate combiner aka logic OR circuit). It has 9 inter-connected sockets that may be split into different group combinations depending upon how it is patched. The jacks circled in white will make or break the interconnects between the 3 groups of three, thus allowing for three 3-way, one 5-way/ one 3-way or one 7-way multiple. The Multiple is passive, because the Make Noise system does not require Buffered Multiples since all critical control signals are already buffered in such a way as to provide a large fan-out capability.

    Rp550.000,00
  • Dynamix-makenoisemusic-analogcouple-webstore
    Dynamix-makenoisemusic-analogcouple-webstore

    DynaMix – Make Noise

    ,

    DynaMix is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter allows for using audio as a control voltage. It accepts audio signals and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for side-chaining and ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.

    Rp2.650.000,00
  • Tempi-makenoisemusic-analogcouple-webstore
    Tempi-makenoisemusic-analogcouple-webstore

    Tempi – Make Noise

    ,

    TEMPI is a 6 CHannel, polyphonic time-shifting clock module. It provides an intuitive method for creation and recall of complex clocking arrangements within a modular synthesizer system. Using HUMAN and/ or MACHINE programming you could re-create most classic Clock Divider and Multiplier arrangements and then continue on to create new ones. Store up to 64 for later recall and Select them using control signals from within your system or the Select Bus.

    Rp4.250.000,00