Filter & VCA

Filters

Showing all 10 results

View 20/40/All

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets

10 products

  • Moddemix-makenoisemusic-analogcouple-webstore
    Moddemix-makenoisemusic-analogcouple-webstore

    ModDemix – Make Noise

    ,

    The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.

    Rp2.250.000,00
  • Dynamix-makenoisemusic-analogcouple-webstore
    Dynamix-makenoisemusic-analogcouple-webstore

    DynaMix – Make Noise

    ,

    DynaMix is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter allows for using audio as a control voltage. It accepts audio signals and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for side-chaining and ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.

    Rp2.650.000,00
  • LXD-makenoisemusic-analogcouple-webstore
    LXD-makenoisemusic-analogcouple-webstore

    LXD – Make Noise

    ,

    The LxD, Low Strike Duo, is a dual-response, two channel, direct-coupled, Low Pass Gate, which utilizes vactrols in order to provide simultaneous control over the Amplitude and Frequency Spectrum of an INput Signal. It is, in essence, a VCFA (Voltage Controlled Filter Amplifier). Unlike the Optomix, the LxD offers two different filter responses. CH. 1 offers a 12db/Octave response that is mildly-resonant, while CH. 2 offers a 6bd/Octave that is non-resonant. The OUTput of CH. 1 is normalled to the INput of CH. 2. This normalization puts the two channels in series, which is similar to the VCF into VCA arrangement made popular by many monosynths of the 1970s.

    Rp1.700.000,00
  • Malekko_Heavy_Industry_borg_analog_couple_webstore
    Malekko_Heavy_Industry_borg_analog_couple_webstore

    Richter Dual Borg Filter – Malekko Heavy Industry

    ,

    DUAL ANALOG FILTER MODULE

    The Dual Borg contains one Borg I (left side) and one Borg II (right side). These are two different filters, each with their own character. They do not sound the same nor react the same way to your inputs. The Dual Borg is a versatile audio processor and the concept comes from a marriage of two divergent influences: the Buchla 292 Low Pass Gate and the Korg MS20 filter.

    Rp5.000.000,00
  • uVCA_intellijel_analogcouple
    uVCA_intellijel_analogcouple

    µVCA – Intellijel

    ,

    Dual VCA

    Tight, But Perfect Fit

    A great fit for a small system or to fill in that last bit of space in your performance rack. Dial in the exact sweet spot with the variable control response. It can also act as a 2 channel mixer in a pinch. There’s always room for a couple more VCAs in your patch.

    Rp2.375.000,00
  • Mixup - Intellijel_analogcouple
    Mixup - Intellijel_analogcouple

    Mixup – Intellijel

    , ,

    Chainable Mono / Stereo Audio Utility Mixer

    Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel)  and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

    Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

    Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for ‘pops’ when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

    Rp1.550.000,00
  • Polaris - Intellijel_analogcouple
    Polaris - Intellijel_analogcouple

    Polaris – Intellijel

    ,

    Versatile Multimode VCF + Phaser

    The Search

    Liquid, buttery filtering with refinement. The Polaris offers a massive 27 filter options over five categories. With a simple UI, three additional dedicated outs, overdrive and distortion circuits, you’ll find your sound.

    Features

    • Dedicated LP, BP and HP outputs.
    • MULTI output with 27 selectable filter types: 4 x LP, 5x BP, 4 x HP, 5 x Notch, 4x AP and 4 x Phaser (AP mode with inverted dry blend).
    • Input drive control with soft clipping distortion.
    • MULTI output asymmetric distortion.
    Rp3.600.000,00
  • Quad VCA - Intellijel_analogcouple
    Quad VCA - Intellijel_analogcouple

    Quad VCA – Intellijel

    ,

    Quad Voltage Controlled Amplifier and Cascaded Mixer

    Oh My Quad…

    When you get into eurorack, you’ll inevitably come across the old addage—you can never have enough VCAs. It’s true, but it’s a bit over simplified, the Quad VCA is not. Each of the four VCAs has independant level control, bipolar CV inputs with attenuators and led indicators, adjustable linear/exponential response and and a +6dB boost switch to double the channels output. Each channel’s CV inputs are cascaded to the next, as are its outputs so that you can create submixes.

    Rp2.950.000,00
  • Comb-2hp-analogcouple-webstore
    Comb-2hp-analogcouple-webstore

    Comb – 2HP

    ,

    Comb is an IIR peaking comb filter with control over cutoff frequency, resonance that can be driven into self oscillation, and a dampening filter in the feedback path.

    An incredibly short, tuned delay line will alter the character of your input by imposing harmonic peaks on the source. Subtle settings can result in thickening timbres, reminiscent of phaser-like effects, while more extreme settings can create lustrous string sounds from white noise, or tear your waveform to shreds.

    Only available in black. Please send us a message if you’d like to have the module with silver faceplate.

    Rp1.750.000,00
  • VCA front-2hp-analogcouple-webstore
    VCA side-2hp-analogcouple-webstore

    VCA – 2HP

    ,

    The 2hp VCA is a dual, linear VCA. It uses the renowned 2164 SSM architecture, giving it extremely low distortion and high quality audio outputs. With a CV input attenuator, and DC-coupled inputs this is your new go-to module for voltage controlled amplification of audio or CV.

    Currently out of stock. Please contact us for pre-order.

    Rp1.450.000,00