MUSIC

Filters

Showing 101–116 of 116 results

View 20/40/All

Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets

101-116 of 116 products

  • DIY Swamp (PCB + ICs) - Erica Synths
    DIY Swamp (PCB + ICs) - Erica Synths

    DIY Swamp (PCB + ICs) – Erica Synths

    , ,

    The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module; it’s often the heart of self-generating patches and brings controllable randomness to your modular system.

    In the SWAMP module we introduced numerous modifications and improvements to extend potentiometer range, added an audio input, which, when connected, replaces the internal Tone oscillator, replaced the expensive dual vactrol, built S&H circuit around the made in Riga S&H IC AS1100CK2, added audio waveform selection switches, CV output configuration jumpers and much more.

     Features:

    • Three random audio frequency outputs
    • External audio input routed to ring modulator
    • Three random CV outputs
    • Clock input and output to sync the module to your modular system
    • CV control over internal clock for even more extreme randomness
    • Skiff-friendly design
    Rp635.000,00
  • DIY Polivoks VCF II (Full Kit) - Erica Synths
    DIY Polivoks VCF II (Full Kit) - Erica Synths

    DIY Polivoks VCF II (Full Kit) – Erica Synths

    , ,

    Polivoks VCF is famous for its’ crazy resonance sweeps and deep, bassy sound which makes it ideal for acid basslines.

    We believe, this is one of most is one of most authentic sounding famous Russian synth Polivoks VCF emulations available. The original Russian ICs K140UD12 are used in the sound circuit. We did several updates to adapt the VCF for contemporary modular synth demands. Independently buffered inputs, extended Cutoff knob range, eliminated clicks, when switching filter modes, and output stage added to eliminate signal inversion.

        Features:

    • Switchable BP/LP modes
    • Inputs/outputs are protected against over-voltage
    • Protection on reversed power supply
    • Skiff friendly design

         

    The DIY Polivoks VCF II PCB only is also available.

    Rp1.350.000,00
  • DIY Polivoks VCF II (PCB Only) - Erica Synths
    DIY Polivoks VCF II (PCB Only) - Erica Synths

    DIY Polivoks VCF II (PCB Only) – Erica Synths

    , ,

    Polivoks VCF is famous for its’ crazy resonance sweeps and deep, bassy sound which makes it ideal for acid basslines.

    We believe, this is one of most is one of most authentic sounding famous Russian synth Polivoks VCF emulations available. The original Russian ICs K140UD12 are used in the sound circuit. We did several updates to adapt the VCF for contemporary modular synth demands. Independently buffered inputs, extended Cutoff knob range, eliminated clicks, when switching filter modes, and output stage added to eliminate signal inversion.

        Features:

    • Switchable BP/LP modes
    • Inputs/outputs are protected against over-voltage
    • Protection on reversed power supply
    • Skiff friendly design

    The DIY Polivoks VCF II Full Kit is also available.

    Rp475.000,00
  • DIY Polivoks VCO (Full Kit) - Erica Synths
    DIY Polivoks VCO (Full Kit) - Erica Synths

    DIY Polivoks VCO (Full Kit) – Erica Synths

    , ,

    The core of the VCO is borrowed from famous Russian synth Polivoks VCO and in exponential converter we use the original matched transistor IC that was used in Polivoks. But there are significant updated schematics to have the most out of your modular setup.

    Features:

    • Triangle, saw and pulse wave outputs
    • Manually adjustable and CV controlled pulse width
    • Great tracking across 8 octaves
    • Exponential FM input with attenuator
    • Synchronization input
    • Octave switch – 5 octaves
    • Skiff-friendly design
    Rp2.100.000,00
  • DIY Polivoks VCO (PCB + ICs) - Erica Synths
    DIY Polivoks VCO (PCB + ICs) - Erica Synths

    DIY Polivoks VCO (PCB + ICs) – Erica Synths

    , ,

    The core of the VCO is borrowed from famous Russian synth Polivoks VCO and in exponential converter we use the original matched transistor IC that was used in Polivoks. But there are significant updated schematics to have the most out of your modular setup.

    Features:

    • Triangle, saw and pulse wave outputs
    • Manually adjustable and CV controlled pulse width
    • Great tracking across 8 octaves
    • Exponential FM input with attenuator
    • Synchronization input
    • Octave switch – 5 octaves
    • Skiff-friendly design
    Rp635.000,00
  • Pico Drum Programmer - Erica Synths
    Pico Drum Programmer - Erica Synths

    Pico Drum Programmer – Erica Synths

    ,

    If you wish to upload your own drum samples to Pico DRUM module, you’ll need Pico DRUM programmer. Refer to Pico DRUM user manual for sample upload instructions!

    Rp350.000,00
  • Pico Drums - Erica Synths
    Pico Drums - Erica Synths

    Pico Drums – Erica Synths

    ,

    Erica Pico DRUM1 module gives you two independent great sounding drums with versatile control over several parameters and extensive collection of drum samples.

    Chain up several Pico Drums and get one of the smallest modular drum setup in the modular world!

          Features:

    • 2 independent drums
    • 64 samples for each drum
    • USB interface for user samples upload
    • Google app for sample upload
    • Independent controll over Pitch, Decay and Level for each drum
    • Independent controll over Pitch, Decay and Level for each drum
    • Seperate triggers for each drum
    • Audio output of mixed drum sounds
    • Exclusive switch to select how the two drums interact with
    • Each other when triggered at the same time
    • 12bit resolution, 44kHz sampling frequency
    Rp2.050.000,00
  • Sold out
    Pico A Mix - Erica Synths
    Pico A Mix - Erica Synths

    Pico A Mix – Erica Synths

    ,

    Erica Pico Audio Mixer is simple 3 channel AC coupled mixer intended to mix audio signals before feeding them in other modules.

    Features:

    • 3 inputs
    • Diode protection against overvoltage
    Rp875.000,00
  • Pico RND - Erica Synths
    Pico RND - Erica Synths

    Pico RND – Erica Synths

    ,

    Erica Pico RND is combined LFO/random source module.

    It generates sine LFO waves, white noise, S&H CV and some interesting stuff – random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.

    Features:

    • Sine and pulse LFO with manually controlled frequency
    • White noise generator
    • LFO rate synchronization to the external clock
    • Internally and externally clocked S&H CV output
    • Random trigger output
    Rp1.475.000,00
  • Pico VCO - Erica Synths
    Pico VCO - Erica Synths

    Pico VCO – Erica Synths

    ,

    Erica Pico VCO is great, deep sounding VCO with 32 selected waves – classical, fattened with sub-oscillator, FM synth and others.

    Typically you need several rather expensive modules to generate similar sounds. Extra feature – flip a switch, and you have a versatile LFO!     

          Features:

    • 2 banks, each contains 16 waves
    • VCO/LFO mode
    • Voltage controlled wavesurfing
    • Wave morphing in LFO setting
    Rp1.700.000,00
  • Sold out
    Pico Voice - Erica Synths
    Pico Voice - Erica Synths

    Pico Voice – Erica Synths

    ,

    Pico Voice from Erica Synths is amazingly versatile sound source just in 3HP. It features 8 sound generation algorithms: Karplus Strong, Chords, Wavetable, TB303 bass-line emulation, PWM, Supersaw, Wavefold and Harmonic saturation, with three adjustable parameters per algorithm and CV control over one user defined parameter. Despite the small size, Pico Voice sounds bigger than it is!

    Features:

    • 8 great sounding
    • Manual and 1V/oct Tuning
    • 2 adjustable parameters per algorithm
    • Assignable CV control over algorithms
    • User setting memory
    • Colour coded algorithms selection
    Rp2.050.000,00
  • Neumann - KH 80 DSP
    Neumann - KH 80 DSP

    Neumann – KH 80 DSP

    The KH 80 DSP two-way active bi-amplified monitor features a DSP engine with network control, a Mathematically Modeled Dispersion™ Waveguide (MMD™), an analogue input and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 80 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.

    The KH 80 DSP is designed for use as a near-field monitor, as a front loudspeaker in small multi-channel systems, or as a rear loudspeaker in a compact multi-channel systems. It can be used in project and music studios, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering. It is also well suited for use in domestic environments.

    Rp16.821.000,00
  • Neumann - KH 120 A
    Neumann - KH 120 A

    Neumann – KH 120 A

    The Neumann KH 120-A Studio Monitor combines a 1″ titanium fabric dome tweeter powered by 50 W RMS (80 W peak) of analog amplification with a 5.25″ long throw composite sandwich cone bass driver powered by 50 W RMS 80 W peak) analog amplification with dual front panel bass ports. The two speaker drivers are mounted in an elliptical mathematically modeled dispersion waveguide for smoother off-axis response and a more forgiving sound signature in different acoustical environments.
    The front panel is made from one piece without discontinuities to reduce diffraction with protective metal grills and the cabinet is made of magnetically shielded aluminum to reduce resonances, improve heat dissipation, and extend the operating lifetime of the unit. The monitor is suitable for professional tracking, mixing, and mastering applications in broadcast, project, and post-production studios.
    The system delivers a free field frequency response of 52 to 21,000 Hz with 4-position bass, low-mid, and treble acoustical controls for tailoring the response to different rooms and an input gain control from 0 to -15 dB. The front panel Neumann logo functions as an LED indicator for power and clip/limiting but can also be dimmed for light applications and for use when placed behind screens. A variety of wall, ceiling, truss, subwoofer, stand, and surface mounting options are available through a range of accessories (sold separately).

    Rp25.311.600,00
  • Neumann - KH 310 A
    Neumann - KH 310 A

    Neumann – KH 310 A

    The KH 310 three-way active tri-amplified monitor features a Mathematically Modeled Dispersion™ Waveguide (MMD™), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.

    The KH 310 is designed for use as a near-field monitor, as a front loudspeaker in mid-sized multi-channel systems, or as a rear loudspeaker in a larger multi-channel system. It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering.

    Rp75.881.400,00
  • Bespeco Cables
    Bespeco Cables
  • AC Custom - System 5
    AC Custom - System 5