Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.
With the rate of the arpeggio and reset capability in your own hands, you’re free to create dynamic rhythmic melodies from your favorite chords. Take your tonality for a ride with Arp.
Only available in silver. Please send us a message if you’d like to have the module with black faceplate.
The Varigate 4+ is a 4-channel, 8-step sequencer that includes the features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you’re looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).
MITØ (derived frøm “mitøsis”) is a 6 channel trigger sequencer that specializes in swingin’, divide’n, n’ pølyrhythm’n. With the turn øf a knøb, the user can select which divisiøn øf the incøming cløck (BANG!) is øutput frøm the cørrespønding jack (all the way left: divide by 16, all the way right: divide by 1). Each channel is equipped with it’s øwn mute switch, alløwing the user tø turn each individual sequence øn and øff while øther channels keep chuggin’ and cløckin’ aløng. Gløbal swing can be cøntrølled with the amøeba knøb in the tøp right hand cørner øf the mødule. Beneath the amøeba, a gløbal pulse width feature alløws the user tø lengthen and shørten pulse length øf all 6 channels at the same time. This feature is particularly useful when paired with the Muskrat & Kriket, ør any øther mødule that reacts prøpørtiønally tø incøming pulse length. Last but nøt least, the RESET input will set all divisiøn cøunts back tø zerø tø square up yøur grøøve. Each channel will be held HIGH as løng as the incøming vøltage is HIGH. This RESET capability alløws yøu tø get even møre ødd metered grøøves as it is nøt dependent øn the internal cløck øf MITØ.
Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.
Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.
Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for ‘pops’ when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.