When triggered, the Deviant øutputs a randøm vøltage between the ranges set by Tøp and Bøttøm knøbs respectively (-5v tø 5v). Bøth Tøp and Bøttøm have bipølar CV inputs, alløwing the user tø mødulate the windøw øf vøltages. Tø cøntinue in the Møffenzeef ethøs øf kraptastik electrønics, there is nøt a søphisticated DAC (digital tø analøg cønverter) øn the øutput øf the Deviant. Instead, a simple pulse-width mødulated løwpass filter is cøntrølled by the “Smøøth” knøb alløwing the user tø dial in the amøunt øf nøise, and the øverall slew øf the øutput. The design relies heavily øn the gnarly søund øf the PWM (pulse width mødulatiøn) carrier frequency emitted frøm the brain øf the mødule which injects itself intø whatever yøu plug the Deviant intø. When plugged intø parameters expecting hard edges (a la Specimen øn GMØ) the Deviant will make the target glitch subtly which adds krispidy krunchidy klix n’ pøps. If plugged intø an audiø rate søurce like a VCØ ør VCF, the carrier frequency gives the target a mild timbral shift reminiscent øf ring mød.
MØUNTING DEPTH: 20MM
CURRENT DRAW: 40 MA +12V
20 MA -12V
0 MA +5V
100K INPUT IMPEDANCE
1K ØUTPUT IMPEDANCE
SEPARATE CØNTRØL ØF TØP AND BØTTØM RANGE ØF RANDØM VØLTAGES
BIPØLAR CV INPUTS FØR TØP AND BØTTØM RANGE ØF RANDØM VØLTAGES
SLEW PER CHANNEL
CH. 1 NØRMALIZED TØ CH. 2 FØR TWØ CHANNELS ØF RANDØM FRØM A SINGLE TRIGGER SØURCE
ØPEN SØURCE: USERS CAN HACK AND FLASH CØDE FRØM ØUR GITHUB
LØW RESØLUTIØN AND NØISY ØUTPUT: A CHARACTERIZED TAKE ØN A CLASSIC TECHNIQUE.
Erica Pico RND is combined LFO/random source module.
It generates sine LFO waves, white noise, S&H CV and some interesting stuff – random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.
Sine and pulse LFO with manually controlled frequency
Great space effective unity mixer for audio and cv. Trimpot on the back for gain staging.
Module A-138u is a simple, low-cost mixer with two units. Each unit is equipped with three inputs and one output. The upper unit has for each input a trimming potentiometer available that allows to adjust the amplification in the range 0…+1 for each input (factory setting is 1 for all inputs). The inputs of the lower unit all have the same amplification +1.
The output of the upper unit is normalled to the first input of the lower unit. That way the module can be used also as a mixer with five inputs: for this the inputs 1, 2 and 3 of the upper unit ad the inputs 2 and 3 of the lower unit are used. The sum output for all five signals is then the output of the lower unit. As soon as a plug is inserted into input 1 of the lower unit the module becomes a dual 3-in-1 mixer again.
Inputs and Outputs are DC-coupled, i.e. audio and control signals can be mixed.
Mixer for audio signals, e.g. three VCOs preceding a VCF, when the amplifications are adjusted slightly different no signal extinction occurs during the beat of the VCOs
Mixer for control voltages (e.g. LFOs, envelope generators, random voltages)