Great space effective unity mixer for audio and cv. Trimpot on the back for gain staging.
Module A-138u is a simple, low-cost mixer with two units. Each unit is equipped with three inputs and one output. The upper unit has for each input a trimming potentiometer available that allows to adjust the amplification in the range 0…+1 for each input (factory setting is 1 for all inputs). The inputs of the lower unit all have the same amplification +1.
The output of the upper unit is normalled to the first input of the lower unit. That way the module can be used also as a mixer with five inputs: for this the inputs 1, 2 and 3 of the upper unit ad the inputs 2 and 3 of the lower unit are used. The sum output for all five signals is then the output of the lower unit. As soon as a plug is inserted into input 1 of the lower unit the module becomes a dual 3-in-1 mixer again.
Inputs and Outputs are DC-coupled, i.e. audio and control signals can be mixed.
Mixer for audio signals, e.g. three VCOs preceding a VCF, when the amplifications are adjusted slightly different no signal extinction occurs during the beat of the VCOs
Mixer for control voltages (e.g. LFOs, envelope generators, random voltages)
Arp is a gate-driven arpeggiator with a multitude of chord types and playback modes. Voltage control over both root note and chord type allow for sequencing any combination of chords in any key imaginable.
With the rate of the arpeggio and reset capability in your own hands, you’re free to create dynamic rhythmic melodies from your favorite chords. Take your tonality for a ride with Arp.
Only available in silver. Please send us a message if you’d like to have the module with black faceplate.
6 Channel, 3 Bus CV/Audio Mixer w/Digitally-Controlled Muting
Blending signals and mixing audio is what patching is all about. Consider mixing up to six audio or CV signals down to three separate busses. Now take it a step beyond by sequencing or toggling mute states on the incoming signals with CV from a clock source, sequencer or even a random source.
The Varigate 4+ is a 4-channel, 8-step sequencer that includes the features of the original Varigate 4, PLUS the new option to output both CV (quantized or unquantized) and gates simultaneously. Other new features include a Play/Stop function, Preset Banks (4×4), Glide Per Step, Scales and can also be configured as master for the Malekko Voltage Block as well as a slave to the Varigate 8+ if you’re looking to expand your total channels and presets (up to 14 channels and 100 presets with V8+).