Erica Synths Pico Trigger module provides a master clock for the Pico System and it generates up to 16 step patterns of 4 triggers, simple clock divider patterns, and more advanced polyrhythmic patterns of different step length for triggering drums.
Selectable internal clock or external clock
4 trigger outputs
8 pattern memory
Web-based pattern design interface
Pattern upload via CLK input
You can design your patterns in a custom web interface and then upload them to the module via CLK in 3,5mm jack.
The heart of Frames is a 4-channel digitally controlled analog VCA. Through flexible input/output mixing and normalling options, it can be patched to serve the following purposes (among others): * 4-channel attenuator/VCA. * 4-channel mixer. * 4-channel programmable CV source. * Quadraphonic panner.
I/O: * 4x DC-coupled signal inputs * 4x Attenuated signal outputs * Global signal input normalled to all inputs * Mix output * Frame control CV input * Frame change trigger output
Controls: * 4x Channel level control with LEDs for visualizing levels * Frame control with RGB LED backlight * Frame CV attenuverter * Keyframe creation/suppression buttons
Technical characteristics: * CV inputs impedance: 100k. * Audio input impedance: 100k (25k for the global input in some configurations due to normalling). * Cortex-M3 ARM processor. * Open-source hardware and firmware. * Easy firmware updates through an audio interface.
Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel) and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.
Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.
Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for ‘pops’ when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.