Use Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock and above. When used with drum machines, it even emulates side chain compressors. When used to mix signals from VCOs Fusion Mixer works as wave shaper, especially, if pulse width modulated pulse signals is used in one of inputs.
All Fusion modules by default are configured to work with regular eurorack PSU.
6 audio inputs
Two independent 3-input mixer
Sum of all 6-inputs
Soft tube overdrive
Configurable power supply – standard Eurorack +-12V connection OR Eurorack +-12V plus Erica Synths Tube heater PSU
The beating heart(s) of your rack, the analog oscillator. If the Dixie2‘s six waveform outputs don’t offer enough shapes for you, the PWM, sync, and FM inputs have you covered. Unique to the Dixie2+ is PWM control, exponential FM, and an Octave switch for quick asnd precise musical tuning. Great in pairs, two hearts are better than one.
Quad Voltage Controlled Amplifier and Cascaded Mixer
Oh My Quad…
When you get into eurorack, you’ll inevitably come across the old addage—you can never have enough VCAs. It’s true, but it’s a bit over simplified, the Quad VCA is not. Each of the four VCAs has independant level control, bipolar CV inputs with attenuators and led indicators, adjustable linear/exponential response and and a +6dB boost switch to double the channels output. Each channel’s CV inputs are cascaded to the next, as are its outputs so that you can create submixes.