The modDemix features 2 identical direct-coupled balanced modulator circuits that may be used together or independently for Ring Modulation, VCA, Mixer, Signal Multiplication, Voltage Controlled Polarization, Attenuation and more.
Unique balanced modulator circuit turns OFF around zero volts at the Carrier/ Control INput, making the circuit behave well as a VCA
STRENGTH is a Combo Knob, with nothing patched to STRENGTH CV IN, it works as a standard panel control, setting Level. With signal patched to STRENGTH CV IN, it works as an attenuator, setting the strength of the modulation
Both circuits feed a summing stage, allowing the module to be used as a voltage controlled mixer
AUXiliary IN allows for the stacking of multiple modDemix and/ or Optomix to create larger mixes
Able to introduce warm distortions to audio signals, sounds like no other VCA or Ring Mod
MAX BLINKENLIGHTS, 8 LEDs packed into a small 6hp module
The Blue Lantern Steiner 10 Stage VCF re-release marks the return of one of their earliest modules. Like its predecessor, the module was inspired by the Steiner Synthacon filter. It is a completely analog filter that utilizes a 10-stage diode core and dedicated low-pass, band-pass, and high-pass inputs. Each out the inputs can be used simultaneously for mixing different VCO signals.
Unlike its predecessor, the Steiner 10 Stage VCF re-release features JFET power coupling, precision trimmers on the cutoff and resonance, and DC cutoff on the resonance circuit. Additionally, the module’s trimpot allows for precise resonance adjustment, extending from smooth to screeching at the turn of a knob.
DynaMix is a fast two-channel Low Pass Gate, dynamics manager and mixer, the core of which is derived from our 0-COAST synthesizer. The LEVEL parameter provides simultaneous voltage control over the Amplitude and Frequency content of audio signals, operating as a VCF/A. The DYNMC parameter allows for using audio as a control voltage. It accepts audio signals and converts them into a signal that may increase or decrease the LEVEL parameter thus allowing for side-chaining and ducking. The summing section is complete with an AUXiliary INput allowing for the chaining of multiple MIX units (modDemix, Optomix and RxMx modules) to create large, non-centralized mixes.
Control your drum modules and trigger events on your modular from any MIDI sequencer!
If you want to use a MIDI sequencer to trigger events on your modular synthesizer (e.g. using the hexinverter.net Mutant drums range or Tiptop Audio classical drum modules or envelope generators to control VCAs), Erica Synths MIDI to trigger module is just what you need; it converts ANY MIDI notes to eight 10ms Trigger signals. When designing the module, we put usability as priority; it will take you seconds to program the module. It works with any MIDI sequencer & controller so there is no need to change MIDI controller settings, instead, you reprogram the module.