Nothing is more unique to your music than you. Press and slide your fingers along the four pads to turn your movements into CV and smooth out the rough edges with built-in slew. Use it as a keyboard, drum pads, faders, LFOs, voltage memory or more. Add yourself to your music.
Tetrapad is a versatile, multi-dimensional, touch-sensitive control surface for Eurorack. Each of its four pads use force sensing resistors to respond to both the vertical position of your finger and its pressure. Four push encoders and a shift function give you even more tactile control over your modular system.
Four pressure and position sensitive pads, each with a corresponding press-able encoder and LED.
Eight flexible outputs and LED indicators that can send Pitch, Gate, or other CV signals depending on the selected mode.
The pads can be set to function as a keyboard, a chord generator, a bank of faders, an LFO control, drum pads, switches, or trigger a specific voltage.
Able to personalize pressure response and automatically save all settings for future use.
Tetrapad operates in numerous modes — each of which configures the module to perform a specific control task. Through these modes, Tetrapad can emulate a bank of faders; a voltage storage device; a finger drumming surface; a chord generator; an 8-key keyboard; four independent LFOs; or an 8-switch panel. The chosen mode determines what type of signal (CV, note, trigger, gate, etc.) is sent from each of Tetrapad’s eight independent outputs, while its multitude of multi-colored LEDs keep you informed of exactly what’s happening within each mode.
Tetrapad automatically remembers how you’ve configured each of its modes, and retains these settings when powered off. By default, Tetrapad automatically saves these settings every minute, or whenever you change modes. This makes Tetrapad ideal for live performance, since you know it will always power up with your configurations intact.
Polivoks VCF is famous for its’ crazy resonance sweeps and deep, bassy sound which makes it ideal for acid basslines.
We believe, this is one of most is one of most authentic sounding famous Russian synth Polivoks VCF emulations available. The original Russian ICs K140UD12 are used in the sound circuit. We did several updates to adapt the VCF for contemporary modular synth demands. Independently buffered inputs, extended Cutoff knob range, eliminated clicks, when switching filter modes, and output stage added to eliminate signal inversion.
Contour is a 4 Stage function generator, or ADSR, derived from our 0-COAST synthesizer. It is designed to create control voltages to drive the Dynamix, modDemix and other fast VCAs, VCFs, and more. The Contour takes inspiration from the original Loudness Contour circuit of the MiniMoog, which is perhaps the most well-known example of East Coast Synthesis. The simplified control set (where Decay adjust both the decay to Sustain and the Release) makes it quick and intuitive to set-up. The Contour module adds full voltage control, a mirrored output, End of Onset and End of Contour Gate outputs which allow it to be highly integrated into any modular synthesizer regardless of coastal allegiance.