TM is a probabilistic random sequence generator based on the research of Alan Turing. His Turing machine was a mathematical model of computation that could, in theory, create any output based on a set of instructions and input variables. In a similar way, the TM chooses random values for steps in a sequence based on the user’s probability settings.
Only available in black. Please send us a message if you’d like to have the module with silver faceplate.
By manipulating probability and sequence length, the module can generate an infinite number of sequences. Whether you’re looking for a controlled random source, or an evolving melody generator, TM has you covered.
Probability control from full random, to locked sequence
Sequence length from 1-32 steps
Amplitude control for limiting the range of new random values
MITØ (derived frøm “mitøsis”) is a 6 channel trigger sequencer that specializes in swingin’, divide’n, n’ pølyrhythm’n. With the turn øf a knøb, the user can select which divisiøn øf the incøming cløck (BANG!) is øutput frøm the cørrespønding jack (all the way left: divide by 16, all the way right: divide by 1). Each channel is equipped with it’s øwn mute switch, alløwing the user tø turn each individual sequence øn and øff while øther channels keep chuggin’ and cløckin’ aløng. Gløbal swing can be cøntrølled with the amøeba knøb in the tøp right hand cørner øf the mødule. Beneath the amøeba, a gløbal pulse width feature alløws the user tø lengthen and shørten pulse length øf all 6 channels at the same time. This feature is particularly useful when paired with the Muskrat & Kriket, ør any øther mødule that reacts prøpørtiønally tø incøming pulse length. Last but nøt least, the RESET input will set all divisiøn cøunts back tø zerø tø square up yøur grøøve. Each channel will be held HIGH as løng as the incøming vøltage is HIGH. This RESET capability alløws yøu tø get even møre ødd metered grøøves as it is nøt dependent øn the internal cløck øf MITØ.
Great space effective unity mixer for audio and cv. Trimpot on the back for gain staging.
Module A-138u is a simple, low-cost mixer with two units. Each unit is equipped with three inputs and one output. The upper unit has for each input a trimming potentiometer available that allows to adjust the amplification in the range 0…+1 for each input (factory setting is 1 for all inputs). The inputs of the lower unit all have the same amplification +1.
The output of the upper unit is normalled to the first input of the lower unit. That way the module can be used also as a mixer with five inputs: for this the inputs 1, 2 and 3 of the upper unit ad the inputs 2 and 3 of the lower unit are used. The sum output for all five signals is then the output of the lower unit. As soon as a plug is inserted into input 1 of the lower unit the module becomes a dual 3-in-1 mixer again.
Inputs and Outputs are DC-coupled, i.e. audio and control signals can be mixed.
Mixer for audio signals, e.g. three VCOs preceding a VCF, when the amplifications are adjusted slightly different no signal extinction occurs during the beat of the VCOs
Mixer for control voltages (e.g. LFOs, envelope generators, random voltages)