A great fit for a small system or to fill in that last bit of space in your performance rack. Dial in the exact sweet spot with the variable control response. It can also act as a 2 channel mixer in a pinch. There’s always room for a couple more VCAs in your patch.
VCAs are a critical building block for any modular system. The small 6hp size makes this module great for small cases, but a compact two channel VCA can always be a useful addition to any larger case. This module was adapted from a design by David G. Dixon.
Continuously adjustable curve response from linear to exponential.
The core of the Envelope Generator is borrowed from famous Russian synth Polivoks , but significantly updated schematics – eurorack standard positive gates, envelope amplitude, inverted envelope output, looping feature (looping on gate on). Bonus feature Gate Delay – the module outputs delayed gate signal after Attack stage. Chain up several (4-5) Envelope Generators, each with delayed gate to create evolving polyphonic synth-like pads!
Control your drum modules and trigger events on your modular from any MIDI sequencer!
If you want to use a MIDI sequencer to trigger events on your modular synthesizer (e.g. using the hexinverter.net Mutant drums range or Tiptop Audio classical drum modules or envelope generators to control VCAs), Erica Synths MIDI to trigger module is just what you need; it converts ANY MIDI notes to eight 10ms Trigger signals. When designing the module, we put usability as priority; it will take you seconds to program the module. It works with any MIDI sequencer & controller so there is no need to change MIDI controller settings, instead, you reprogram the module.
Use Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock and above. When used with drum machines, it even emulates side chain compressors. When used to mix signals from VCOs Fusion Mixer works as wave shaper, especially, if pulse width modulated pulse signals is used in one of inputs.
All Fusion modules by default are configured to work with regular eurorack PSU.
6 audio inputs
Two independent 3-input mixer
Sum of all 6-inputs
Soft tube overdrive
Configurable power supply – standard Eurorack +-12V connection OR Eurorack +-12V plus Erica Synths Tube heater PSU
The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module; it’s often the heart of self-generating patches and brings controllable randomness to your modular system.
In the SWAMP module we introduced numerous modifications and improvements to extend potentiometer range, added an audio input, which, when connected, replaces the internal Tone oscillator, replaced the expensive dual vactrol, built S&H circuit around the made in Riga S&H IC AS1100CK2, added audio waveform selection switches, CV output configuration jumpers and much more.
Three random audio frequency outputs
External audio input routed to ring modulator
Three random CV outputs
Clock input and output to sync the module to your modular system
CV control over internal clock for even more extreme randomness