Voltage Block is an 8 independent 16-stage CV sequencer packed with performance features and presets making the Voltage Block the ultimate CV tool. Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more.
8 independent 16-stage CV sequencers packed with performance features and presets makes the Voltage Block the ultimate CV tool. Create quantized or unquantized sequences for each output, record your modulation changes, tie sequences together, mute on the fly, randomize your outputs and so much more. The Voltage Block can be used stand-alone or pairs well with Varigate 4 and especially Varigate 8+ to share clocking and preset save/recall. All in 20hp.
8 channels + 16 stage per channel of CV modulation
Save and recall presets
Live slider/automation recording
Scale selection per output or unquantized 0-5V
Interpolation option for each step for smooth or stepped modulation
Offset and attenuation for CV input
Clock and CV operation modes
Sequence length can be set from 1 to 16 steps
Clock can be divided by up to 16
Randomize all outputs per step
Easy control over stage length
Rest/Hold gate input
Glide per stage
Forward, Reverse, Pendulum or Random directions per channel
Mutes per channel
Mutes per sequence stage
Tie presets together for “Song Mode”
Can be linked to the Varigate 8+ to share clocking and preset save/recall (up to 100 presets)
Erica Pico RND is combined LFO/random source module.
It generates sine LFO waves, white noise, S&H CV and some interesting stuff – random triggers and pulse wave with random duty circle; basically, everything, you need, to bring some uncertainty in your modular setup.
Sine and pulse LFO with manually controlled frequency
Erica Synths Pico Trigger module provides a master clock for the Pico System and it generates up to 16 step patterns of 4 triggers, simple clock divider patterns, and more advanced polyrhythmic patterns of different step length for triggering drums.
Selectable internal clock or external clock
4 trigger outputs
8 pattern memory
Web-based pattern design interface
Pattern upload via CLK input
You can design your patterns in a custom web interface and then upload them to the module via CLK in 3,5mm jack.
Great space effective unity mixer for audio and cv. Trimpot on the back for gain staging.
Module A-138u is a simple, low-cost mixer with two units. Each unit is equipped with three inputs and one output. The upper unit has for each input a trimming potentiometer available that allows to adjust the amplification in the range 0…+1 for each input (factory setting is 1 for all inputs). The inputs of the lower unit all have the same amplification +1.
The output of the upper unit is normalled to the first input of the lower unit. That way the module can be used also as a mixer with five inputs: for this the inputs 1, 2 and 3 of the upper unit ad the inputs 2 and 3 of the lower unit are used. The sum output for all five signals is then the output of the lower unit. As soon as a plug is inserted into input 1 of the lower unit the module becomes a dual 3-in-1 mixer again.
Inputs and Outputs are DC-coupled, i.e. audio and control signals can be mixed.
Mixer for audio signals, e.g. three VCOs preceding a VCF, when the amplifications are adjusted slightly different no signal extinction occurs during the beat of the VCOs
Mixer for control voltages (e.g. LFOs, envelope generators, random voltages)